Victron Energy Phoenix Inverter 12V 1200VA 230V AC Inverters allow you to power domestic equipment...Victron Energy Phoenix Inverter 12V 1200VA 230V AC Inverters allow you to power domestic equipment, requiring 230V AC, using leisure or automotive batteries rated at 12V DC. The inverter is proven reliable, short circuit proof, and protected against overheating. It also features an ECO mode and a remote on/off switch. The VE.Direct port can connect to a computer, smartphone, tablet, or other devices with the appropriate cables or dongles. It is fully configurable with adjustable low battery voltage alarm and cut-off levels, dynamic cut-off, output voltage (210-245V), and frequency (50 Hz or 60 Hz). ECO mode can be turned on/off and its sense level adjusted. The inverter offers monitoring of input and output voltage, load percentage, and alarms. The full bridge plus toroidal transformer topology ensures proven reliability. High start-up power is provided for loads like power converters for LED lamps, halogen lamps, or electric tools. In ECO mode, the inverter switches to standby when the load decreases below a preset value (min load: 15W) and switches on periodically (default: every 2.5 seconds) if the load exceeds a preset level. A remote on/off switch can be connected via a two-pole connector. DC connection uses screw terminals, requiring no special tools for installation. A power lead is not included.
This guide is for users of the Victron Energy Phoenix Inverter, a device that converts 12V DC power from batteries to 230V AC. It's ideal for powering household devices in situations without grid access. A key benefit is its reliable performance and protection against common issues like short circuits. Note that a power lead is not included.
All features
Model Part Number
122121400
Brand
Victron Energy
Extended Product Information
FAQs
What type of battery is required?
The inverter requires a 12V DC battery, typically a leisure or automotive battery.
Can I use the inverter while the battery is charging?
Yes, but ensure the battery charger and the inverter's combined load do not exceed the battery's capacity.
What is the function of the ECO mode?
ECO mode reduces power consumption by putting the inverter in standby when the load is low. It periodically checks for increased load to save power.
What devices can I power with this inverter?
You can power most household devices that require 230V AC, such as lights, small appliances, and electronics, within the inverter's power rating.
What is the VE.Direct port for?
The VE.Direct port is used for monitoring and configuring the inverter using a computer, smartphone, or tablet.
What should I do if the inverter is overloaded?
Reduce the load connected to the inverter. If the overload persists, consider a larger inverter.
Where can I find the serial number?
The serial number is located on the product label on the unit.
Is a power lead included?
No, a power lead is not included and must be purchased separately.
Troubleshooting
Inverter not turning on.
Check the battery connection, ensure the battery is charged, and verify the remote on/off switch is not in the off position.
Low output voltage.
Check the input voltage from the battery. The battery might be low, or the connections may be loose.
Inverter shuts down frequently.
The load may be exceeding the inverter's capacity. Reduce the load or check for short circuits.
ECO mode not working.
Ensure the load is above the minimum threshold (15W) and that ECO mode is enabled in the settings.
VE.Direct port not connecting.
Ensure the correct cable or dongle is used and that the device is compatible with the inverter.
Pros and Cons
Pros
Reliable conversion of DC to AC power.
Built-in protection against short circuits and overheating.
Energy-saving ECO mode.
Configurable settings for optimal performance.
Easy DC connection via screw terminals.
Provides high start-up power for demanding loads.
Cons
Requires a separate power lead for DC connection.
ECO mode may not be suitable for all applications.
Requires additional cables or dongles for VE.Direct port connectivity.
Minimum load requirement of 15W for ECO mode to function correctly.
Installation requires familiarity with electrical connections.
Does not include a remote on/off switch by default.
Setup, Compatibility & Care
Setup:
DC Connection: Connect the inverter to a 12V DC battery using appropriate gauge wires and screw terminals. Ensure correct polarity.
AC Connection: Plug your 230V AC devices into the inverter's outlets.
VE.Direct Connection: Connect the inverter to a computer or device with the correct cable or dongle for monitoring and configuration (if desired).
Remote On/Off: Connect a remote switch to the two-pole connector for remote operation.
Compatibility:
Compatible with 12V DC batteries.
Compatible with 230V AC devices.
VE.Direct port is compatible with Victron Energy devices and some third-party monitoring solutions.
Care:
Keep the inverter in a well-ventilated area.
Avoid exposing the inverter to moisture or direct sunlight.
Regularly inspect the DC connections for corrosion or damage.
Do not exceed the inverter's maximum power rating (1200VA).