Best current price£28.95from eBay
Shopping.co.uk recommended and popular offers
eBay£28.95Visit shop Cadac LP Butane Clip-On Regulator QR
Visit shop
B&Q£32.99Visit shop B&Q - Lp But-Ane Clip-On Regulator Qr
Visit shop5 offers from £28.95 - £32.99
View price history by clicking the chart icon.
The Cadac Butane Clip-On Regulator is designed for campers, caravanners, and outdoor enthusiasts who require a reliable and tool-free gas connection for their cooking appliances. Its standout benefit is the user-friendly clip-on mechanism that facilitates rapid gas cylinder swaps without the need for manual tools, though users should note that it is strictly limited to 28mbar butane systems and is not compatible with propane setups.
| Model Part Number | MA6340800001 |
|---|---|
| Brand | Cadac |
No, this regulator is designed specifically for 28mbar butane systems and is not compatible with propane cylinders.
It is designed for standard 21mm butane cylinders, including Calor 4.5kg and 7kg, and Flogas 5kg, 7kg, and 13kg bottles.
The EFV acts as a safety measure that restricts gas flow by 90% if it detects a significant leak or hose failure, preventing major gas escapes.
No, the clip-on mechanism eliminates the need for spanners or wrenches.
No, the 85cm hose is factory-crimped for safety and cannot be modified or extended by the user.
Ensure the cylinder valve is clean and the regulator is correctly aligned at a 90-degree angle to the valve opening before pressing down firmly.
Check the Excess Flow Valve (EFV) has not been triggered by a sudden surge or blockage. Turn off the appliance, disconnect the regulator, and reconnect slowly to reset.
Immediately turn off the cylinder valve, extinguish all flames, and inspect all crimped connections and the hose for damage. If damage is found, replace the unit immediately.
To set up the regulator, ensure your gas cylinder is upright and the valve is closed. Align the regulator with the 21mm cylinder valve and press down firmly until you hear a secure click. To ensure longevity, keep the unit clean and dry during storage. Always perform a leak test using soapy water around the connections before lighting any appliance. This unit is compatible with 21mm butane cylinders, such as Calor 4.5kg or 7kg and Flogas 5kg, 7kg, or 13kg bottles. Do not attempt to use this with propane cylinders, as the regulator pressure settings (28mbar) are specifically calibrated for butane systems only.
