Best current price£82.80from eBay
Shopping.co.uk recommended and popular offers
eBay£82.80Visit shop McAlpine 50mml Trap 1.5""x 90degree Swivel Outlet 150mm Polished Stain Steel Tile
Visit shop3 offers from £82.80 - £85.39
View price history by clicking the chart icon.
This McAlpine Water Seal Trap is designed for plumbers and homeowners needing to prevent sewer odors and gases from entering buildings via drainage systems, particularly in tiled or stone floor installations. Its key benefit is the effective 50mm water seal, ensuring a reliable barrier against smells, while the multifit outlet offers installation flexibility. A potential consideration is its specific suitability for tiled/stone floors and the overall height requirement.
| Model Part Number | TSG1T6SSSTW295 |
|---|---|
| Brand | McAlpine |
The primary function is to create a water barrier that prevents foul-smelling sewer gases and odors from entering the building through the drainage system.
This particular model is designed specifically for tiled or stone floors. While it might be adapted, its aesthetic and installation are optimized for stone and tile finishes.
Regularly use the drain as normal. If the drain is in an infrequently used area, pour a small amount of water (e.g., a pint) into the gully every few weeks to replenish the seal.
A multifit outlet means the bend can accept various types of pipe connections, typically both solvent weld and push-fit, making installation more versatile.
The trap requires an overall height of 138mm from the underside of the finished floor to the underside of the outlet connection.
Yes, it is suitable for wet room installations, especially those with tiled or stone floor finishes, due to its effective water seal and aesthetic appeal.
The product has been tested and approved to meet relevant British and European standards for drainage components.
Check if the water seal has evaporated due to infrequent use or a dry trap. Pour water into the gully to re-establish the seal. Ensure the trap is correctly installed and not subject to 'siphonage' effects from other appliances.
Remove the stainless steel grid and clean any debris accumulated in the trap body. Check the connected drainage pipe for obstructions. Ensure the outlet bend is not restricted.
Verify the connection between the multifit outlet bend and the drainage pipe is secure and properly sealed, using appropriate solvent cement or push-fit methods as per manufacturer guidelines.
Clean with a mild detergent and a soft cloth. For minor scratches, a specialized stainless steel polish may help restore the finish, but always test in an inconspicuous area first.
Setup:
Compatibility:
Care:
