Best current price£17.50from eBay
Shopping.co.uk recommended and popular offers
eBay£17.50Visit shop Angle Grinder 115mm 4.5 inch 240V 5000W 12000rpm Electric Grinding Sander Corded
Visit shopeBay£17.50Visit shop Electric Angle Grinder 115mm Small Angle Grinding Heavy Duty Tool 5000W 12000RPM
Visit shop
B&Q£69.00Visit shop B&Q - Gws 750 Professional Angle Grinder 750W 240V
Visit shop26 offers from £17.50 - £78.54
View price history by clicking the chart icon.
This guide is for users of the Bosch GWS 750 Angle Grinder, offering a powerful and versatile tool for various grinding and cutting tasks. The key benefit is its robust performance, even under load, thanks to its 750W motor. However, users should be aware of the 115mm disc diameter, which may be a limitation for some larger projects. This guide covers setup, operation, and maintenance to help you get the most out of your angle grinder.
| Model Part Number | 0601394070 |
|---|---|
| Brand | Bosch |
Press the spindle lock button, use the provided wrench to loosen the disc nut, remove the old disc, insert the new disc, and tighten the nut.
Always wear safety glasses, gloves, and a dust mask. Ensure the workpiece is securely clamped, and never operate the grinder without the guard in place.
While the grinder can cut wood, it is generally recommended to use a specific wood-cutting saw. Always use the appropriate cutting disc.
Inspect the power cord before each use for any damage, such as cuts or fraying. Do not use the grinder if the power cord is damaged.
Wipe the exterior of the grinder with a dry cloth after each use. Avoid using water or solvents.
Warranty information is not available in the product data, please refer to the product documentation or contact the manufacturer.
Check the power supply and ensure the power cord is securely plugged in. Also, check the switch and restart protection.
Ensure the disc is properly installed and balanced. Check for any damage to the disc and replace it if necessary.
Allow the grinder to cool down. Check the ventilation slots for blockages and ensure the grinder is not being overloaded.
Check the disc type for the material being cut. Replace the disc if it is worn out or not suitable for the material.
