Best current price£59.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£59.95Visit shop B&Q - Thermilate Pro Flex Interior & Exterior PaintMulti-Surface Paint & PrimerAll-In-OneLondons Magnolia5LMatt
Visit shop2 offers from £59.95
View price history by clicking the chart icon.
This 5L can of Thermilate Technologies Pro Flex Paint in White Matt is for DIY enthusiasts and professionals seeking a versatile, all-in-one paint solution for both interior and exterior projects. Its key benefit is its ability to adhere to multiple surfaces without a separate primer, saving time and effort. A potential caveat is the need for proper surface preparation to ensure optimal adhesion and finish. This paint is formulated to be flexible, breathable, washable, and durable, suitable for high-traffic areas and various materials like wood, metal, UPVC, and walls.
| Colour | White |
|---|---|
| Model Part Number | 5056291363695 |
| Brand | Thermilate Technologies |
On properly prepared surfaces, no separate primer is required. However, if you are painting over stains, very porous surfaces, or materials known for poor adhesion, a suitable primer may still be beneficial for optimal results.
Yes, Thermilate Pro Flex Paint is suitable for radiators. Ensure the radiator is clean, dry, and has no loose paint or rust before application. Apply in thin coats and allow to cure fully.
Yes, the paint is washable and formulated for durability, making it suitable for bathrooms and kitchens. Ensure good ventilation during and after application.
The paint is quick drying. Typically, recoating can be done after 2-4 hours, but this can vary depending on humidity and temperature. Allow sufficient time for thorough drying before exposing to heavy use.
Yes, this paint is designed for application by brush, roller, or sprayer. If spraying, you may need to thin it slightly with water (less than 5%) for optimal flow, following manufacturer guidelines.
Coverage varies by surface type and application method, but typically one litre covers approximately 10-12 square metres per coat. Therefore, a 5L can should cover around 50-60 square metres with one coat.
Yes, provided the surface is properly prepared. Lightly abrade the oil-based paint to create a key, clean thoroughly, and then apply Thermilate Pro Flex Paint.
The product description specifies 'White' without further detail on undertones. It is generally expected to be a standard, neutral white suitable for most applications.
Ensure the surface was properly prepared, clean, and dry. Glossy surfaces may require light abrasion. If applying over a stain or problematic surface, a primer might be necessary despite the 'primer in one' formulation.
Ensure paint is stirred thoroughly. Apply in thin, even coats using a quality brush or roller. Avoid overworking the paint. Consider using a spray application for a smoother finish on large areas. Allow proper drying time between coats.
Check the temperature; very cold conditions can thicken paint. If necessary, a very small amount of water (less than 5%) can be added for spray application, but this may affect performance. Ensure the product has not expired or been stored improperly.
This is normal for many paints. Apply a second coat as recommended for full opacity and a consistent finish. Ensure even coverage during the first coat.
Surface Preparation: Before application, ensure all surfaces are clean, dry, and free from dust, grease, and loose material. For best adhesion, lightly abrade glossy surfaces. If the surface has significant issues like damp or rot, address these before painting.
Compatibility: This paint is suitable for a wide range of surfaces including primed or painted plaster, masonry, wood, metal, UPVC, and previously painted surfaces. It is not recommended for direct application on bare, unprimed plastics not listed as compatible or on surfaces exposed to constant immersion in water.
Application: Stir the paint thoroughly before use. Apply using a good quality brush, roller, or spray. Two coats are generally recommended for optimal coverage and durability. Allow adequate drying time between coats, typically 2-4 hours depending on conditions.
Care: Clean application tools with water immediately after use. For painted surfaces, wipe clean with a damp cloth and mild detergent. Avoid abrasive cleaners.
