Home Treats Wall Panel Wood Slat - 3D Acoustic - Walnut - 240 X 60 Cm

While the panels are durable, prolonged exposure to high humidity or direct moisture is not recommended as it could affect the wood and felt components over time. They are best suited for dry, indoor environments.

For cutting the felt, a sharp utility knife is usually sufficient. For cutting the wooden slats, a fine-tooth saw (such as a hand saw, jigsaw, or miter saw) is recommended for clean and precise cuts.

These panels are designed to significantly reduce echoes and reverberation within a room, creating a noticeably calmer acoustic environment. The exact level of absorption depends on factors like room size, existing furnishings, and the number of panels installed. They effectively improve speech intelligibility and overall sound quality.

The wooden slats feature a laminated walnut coating. Painting or staining over this laminate is generally not recommended as it may not adhere properly and could alter the aesthetic and potentially the acoustic properties of the panel.

Each panel is 60 x 240cm, which is a considerable size. While not excessively heavy for their size, ceiling installation will likely require two people for safe and accurate placement, especially when using adhesive methods.

A soft brush attachment on a vacuum cleaner or a compressed air duster can effectively remove dust from between the slats without damaging the finish.

Ensure the wall surface is clean, dry, and smooth. Use a high-quality construction adhesive or screws for a more secure installation. For glue, apply adequate pressure during initial adhesion and allow sufficient curing time.

Verify that a sufficient area is covered with panels. For optimal acoustic treatment, consider covering a larger surface area or strategic placement in areas prone to sound reflection. Ensure panels are installed flush to the wall without gaps.

When cutting, use a sharp utility knife with a fresh blade for the felt and a fine-tooth saw (like a hand saw or jigsaw) for the wooden slats. Always use a straight edge or guide to ensure precise, clean cuts. Cutting from the felt side first can also help prevent splintering of the wood.