Crompton CFL Light Bulb - White - B

1x 18W Crompton G24d-2, 2 pin, 835 3500K Low Energy CFL Light Bulb PL PLC Lamp G24d-2, 2 Pin Cap f...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

This Crompton CFL Light Bulb is designed for users seeking an energy-efficient lighting solution for standard fixtures. Its primary benefit is significant energy savings and a long lifespan, reducing replacement frequency and electricity costs. A potential caveat is its specific 2-pin G24d-2 fitting, which requires a compatible socket. This 18W bulb provides 1200 lumens of 3500K white light, equivalent to a higher wattage incandescent bulb but consuming far less power.

All features

ColourWhite
Energy EfficiencyB
Model Part NumberCLD18SW
BrandCrompton

Extended Product Information

FAQs

What type of fitting does this bulb have?

This Crompton CFL bulb has a G24d-2, 2-pin cap fitting. It is not compatible with standard screw or bayonet fittings.

How long does this bulb typically last?

The bulb has an estimated lifespan of up to 10,000 hours.

What is the color temperature of the light?

The light color temperature is 3500 Kelvin, which is considered a neutral white light.

What is the equivalent wattage of this 18W CFL bulb?

An 18W CFL bulb provides a light output of 1200 lumens, which is roughly equivalent to a 100W incandescent bulb in terms of brightness.

Can I use this bulb outdoors?

This bulb is generally intended for indoor use in suitable fixtures. Outdoor use may depend on the fixture's rating and protection against the elements.

Is this bulb dimmable?

No, this is a standard non-dimmable CFL bulb. It is not designed to work with dimmer switches.

How should I dispose of this bulb when it's no longer working?

CFL bulbs contain a small amount of mercury and should be recycled properly. Do not place them in regular household trash. Check with your local waste disposal services for recycling options.

Troubleshooting

Bulb does not light up

Ensure the bulb is fully seated in the G24d-2 socket. Verify that the light fixture is receiving power and the switch is on. Check if the bulb has reached the end of its lifespan.

Flickering light

Try reseating the bulb in the socket. If flickering persists, the bulb may be faulty or nearing the end of its life. Ensure the fixture's ballast (if applicable) is functioning correctly.

Bulb turns on slowly or flickers initially

This is sometimes normal behavior for CFL bulbs, especially in colder environments. Allow the bulb a few minutes to reach full brightness. If the delay is excessive or persistent, the bulb might be failing.

Pros and Cons

Pros

  • Significantly reduces energy consumption.
  • Long operational life minimizes replacement costs and effort.
  • Provides bright, pleasant white light (3500K).
  • Cost-effective to operate due to low wattage.
  • Reliable performance from a recognized brand.

Cons

  • Requires a specific G24d-2, 2-pin socket, limiting compatibility.
  • CFL technology may not be suitable for frequent switching applications.
  • Initial purchase cost might be higher than basic incandescent bulbs.
  • Light output (lumens) may not be sufficient for very large or task-specific lighting needs without multiple units.
  • Contains mercury, requiring proper disposal at end-of-life.

Setup, Compatibility & Care

Setup:

  1. Ensure the power to the light fixture is switched OFF before installation.
  2. Carefully remove the old bulb from the socket.
  3. Align the two pins of the Crompton CFL bulb with the G24d-2 socket.
  4. Gently push the bulb into the socket until it is securely seated.
  5. Restore power to the fixture and switch on the light.

Compatibility:

  • This bulb is compatible ONLY with fixtures designed for a G24d-2, 2-pin cap fitting. It will not fit standard screw-in (E27/Edison) or bayonet (B22) sockets.
  • It is designed for use in standard indoor lighting fixtures.

Care:

  • Cleaning: With the power OFF, gently wipe the bulb with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents.
  • Disposal: As this is a CFL bulb containing a small amount of mercury, it should not be disposed of in regular household waste. Please check your local council or waste management services for proper CFL recycling or disposal points.