Best current price£15.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£15.00Visit shop Mirka File Sanding Belt Cer 20X520mm P36 Ceramic T-Joint Pack Of 5 6416868516913
Visit shop1 offer from £15.00
View price history by clicking the chart icon.
The Mirka File Sanding Belt (20x520mm, P36, Ceramic) is designed for professional metalworkers and fabricators who require rapid, aggressive material removal on demanding surfaces. These belts excel at heavy-duty grinding and shaping tasks thanks to their high-performance ceramic abrasive grains, though they are specifically optimized for coarse-grit sanding and may be too abrasive for delicate finishing applications.
| Model Part Number | MIRKASANDINGFILEBELTSCERAMICT-JOINTP36 |
|---|---|
| Brand | Mirka |
While it can remove wood, the P36 ceramic grit is designed for metal. It will be extremely aggressive and likely cause deep gouges.
No, the T-Joint is designed to be low-profile and smooth, preventing the jumping associated with overlapping joints.
This product comes in a pack of 5 belts.
These belts are compatible with any 20x520mm file belt sander.
Yes, ceramic grains are specifically chosen for their ability to withstand the high temperatures associated with heavy metal grinding.
Check the belt tension and adjust the tracking knob until the belt remains centered on the pulleys.
Verify the belt is properly seated and ensure the abrasive seam is not damaged; if vibration persists, check the sander bearings.
Reduce pressure on the workpiece and ensure the sander is running at the correct speed to prevent friction-based melting of metal debris.
Ensure your file sander is unplugged or the battery is removed before installation. To set up, slide the belt onto the drive wheel and contact arm, ensuring the arrow on the inside of the belt matches the direction of the sander rotation. Adjust the tracking knob while the motor is running at a slow speed to ensure the belt is centered. To extend belt life, periodically clear the abrasive surface of swarf using a metal sanding stick or compressed air, and store belts in a cool, dry environment to prevent moisture from affecting the bond strength.
