Streetwize Solar Water Feature with Battery Backup - Elephant with Ball - Grey

The battery backup duration depends on the amount of sunlight the solar panel has received. Typically, a full charge from adequate sunlight will allow operation for several hours after dark or during overcast periods.

No, this water feature is entirely solar-powered with a built-in rechargeable battery. No mains wiring or electrical outlet is required.

Clean the water reservoir with a soft cloth and mild soap or vinegar solution. Rinse thoroughly. Wipe the solar panel with a damp cloth. Avoid using harsh chemicals or abrasive scrubbers.

It is recommended to drain the water feature completely and store it indoors during freezing temperatures to prevent damage caused by ice expansion.

If there is insufficient sunlight to fully charge the battery, the water feature's operation might be reduced or it may not run at all. The battery backup provides a buffer, but consistent operation relies on adequate solar charging.

The feature is designed for simple setup. Once placed, you just need to fill it with water and ensure the solar panel is clean and positioned correctly.

The pump is designed to circulate water effectively for the feature's size, creating a gentle flow to spin the ball and activate the LED. It provides a tranquil effect rather than a powerful jet.

Ensure the solar panel is receiving direct sunlight. Check if the battery is charged. Verify the water level is sufficient for the pump. Clean the solar panel and pump intake for any blockages.

Check for any obstructions in the pump or tubing. Ensure the water reservoir is full. Clean the decorative ball and its base for free movement.

Confirm the battery has sufficient charge from sunlight. Ensure the light sensor is not blocked. Check internal connections if accessible and safe to do so.

Inspect the feature for any cracks or leaks in the resin body or seals. Ensure the feature is on a perfectly level surface to prevent water spillage.