Setup, Compatibility & Care
Setup:
This wallpaper uses the 'Paste-the-Paper' method. This means the adhesive is applied directly to the back of the wallpaper itself, not the wall.
- Measure and cut your wallpaper strips to the required length, allowing for a little extra at the top and bottom.
- Apply a suitable wallpaper adhesive evenly to the back of each strip. Ensure the entire surface is covered.
- Allow the pasted paper to 'relax' or 'ப்பில்' (book) for the recommended time stated on the adhesive packaging, usually 5-10 minutes. This allows the paper to expand and makes it more stable.
- Hang the first strip, ensuring it is perfectly vertical using a spirit level. Butt the edges of the strips together, do not overlap.
- Smooth down the wallpaper using a wallpaper brush or smoother, working from the center outwards to remove air bubbles.
- Trim any excess paper at the ceiling and skirting board with a sharp knife.
Compatibility:
- Recommended Paste: Erfurt Ready Mix Adhesive.
- Surface Preparation: Ensure walls are clean, dry, smooth, and free from old wallpaper or loose paint. Any imperfections should be filled and sanded.
Care:
- This wallpaper is washable. For cleaning, use a damp (not wet) cloth and mild soap if necessary. Wipe gently and avoid harsh scrubbing.
- Avoid abrasive cleaners or excessive moisture, as this can damage the wallpaper surface and metallic highlights.