Bypass Pruner - SK5 Steel Blades

Bypass pruners have two curved blades that slide past each other, similar to scissors, making clean cuts on live plants. Anvil pruners have one sharp blade that closes onto a flat surface (anvil), best suited for cutting dead or woody material.

This pruner is designed for stems, shoots, and small branches. For thicker branches, a larger lopper or saw would be more appropriate to avoid damaging the tool and the plant.

Sharpening frequency depends on usage. If you notice increased resistance or ragged cuts, it's time to sharpen. For regular home garden use, sharpening once or twice a season is often sufficient.

SK5 is a high-carbon steel known for its hardness and edge retention, making it a suitable material for high-quality cutting tools like pruners.

The wire cutting notch is designed for light gauge wires. Use it carefully by positioning the wire in the notch and squeezing the handles. Be aware that cutting materials other than intended plant matter can affect blade longevity.

Please refer to the product packaging or the manufacturer's official website for specific warranty information, as warranty details can vary.

Check for debris or sap buildup around the pivot point or blades. Clean thoroughly and apply a light coat of lubricating oil.

The blades may be dull. Sharpen them using a sharpening stone or file. Ensure the pruner is correctly aligned for the type of cut.

Check the pivot bolt. If it is adjustable, tighten it slightly. If the components are worn, professional repair or replacement may be needed.

Clean the rust gently with a fine steel wool or rust remover. Dry thoroughly and apply a coat of oil to prevent recurrence. Ensure the pruner is stored in a dry environment.