Raceline Throttle Sleeve - Honda CR 125/250/500 1989-2007, KTM SX85 Up to 2017

No, the Raceline Throttle Sleeve (THR.SLEEVE 3) is designed as a specific replacement part for certain Honda and KTM models. Please check the compatibility list before purchasing.

Typically, you will need basic hand tools such as screwdrivers or Allen wrenches to disconnect and reconnect the throttle cables, and potentially a utility knife to remove the old grip.

For experienced users, installation can take as little as 15-30 minutes. For those less familiar, it might take slightly longer, but it is generally a straightforward process.

Yes, this is a replacement throttle tube. You should be able to slide your existing or new aftermarket grips onto this sleeve.

The manufacturer part number for this throttle sleeve is THR.SLEEVE 3.

No, this product is only the throttle sleeve itself. Throttle cables are sold separately.

Ensure the throttle cables are properly lubricated and adjusted for correct free play. Keep the handlebar and sleeve clean to minimize friction.

Check that the throttle cables are correctly seated in the sleeve and not kinked. Ensure the handlebar and sleeve are clean and free of debris. Verify correct throttle cable free play.

Inspect cables for damage or fraying. Ensure the sleeve is not rubbing against any other components. Adjust cable tension if necessary, ensuring there is adequate free play.

Ensure the correct model sleeve for your motorcycle was purchased. Clean the handlebar and the inside of the sleeve thoroughly. If the handlebar is damaged or worn, it may require replacement.