Best current price£4.86from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£4.86Visit shop Polypipe Waste Solvent Weld Abs Bsp Female Threaded Coupling 32Mm Ws31w White
Visit shop1 offer from £4.86
View price history by clicking the chart icon.
This Polypipe Solvent Weld Coupling is designed for residential plumbing professionals and DIY enthusiasts needing a reliable connection for draining liquid waste. Its key benefit is a secure, watertight connection through solvent weld jointing, ensuring efficient waste removal from sanitaryware and kitchen appliances. A potential caveat is the requirement for solvent cement, which needs careful application.
| Model Part Number | WS31W |
|---|---|
| Brand | Polypipe |
Solvent weld jointing uses a chemical solvent to fuse ABS plastic pipes and fittings together, creating a strong, permanent, and watertight bond.
No, this coupling is specifically designed for solvent weld systems and is not compatible with push-fit or compression fittings.
You will need Polypipe solvent cement and primer (if recommended by the cement manufacturer for ABS), a pipe cutter, and a clean cloth.
Curing times vary based on temperature and humidity. Typically, joints can be handled after a few minutes but should not be subjected to full load or pressure for at least an hour, or as specified by the solvent cement manufacturer.
This coupling is designed for general household liquid waste which is typically not excessively hot. For high-temperature applications, consult Polypipe's specific product guidelines.
Polypipe products are typically covered by a manufacturer's warranty. Please refer to the official Polypipe warranty documentation for specific details.
Ensure surfaces were properly cleaned and dried before applying solvent cement. Check for any damage to the pipe or coupling. Re-apply solvent cement and ensure a firm, consistent connection.
Verify that both the pipe end and the interior of the coupling are the correct size and free from obstructions. Ensure no excess solvent cement has pooled inside.
The joint may not have been held sufficiently during the initial setting period. Allow adequate curing time as per the solvent cement instructions. For critical applications, consider re-doing the joint.
Setup: Ensure all pipe ends and the inside of the coupling are clean, dry, and free from grease. Apply Polypipe solvent cement evenly to both surfaces using the applicator. Immediately push the pipe into the coupling with a slight twisting motion until it reaches the stop. Hold firmly for 30 seconds to prevent movement while the cement sets. Allow the joint to cure according to the solvent cement manufacturer's instructions before use.
Compatibility: This 32mm coupling is designed for use with other 32mm ABS solvent weld pipes and fittings within the Polypipe Waste Systems range. The BSP female thread ensures compatibility with standard threaded plumbing components.
Care: Clean the exterior of the coupling with a damp cloth if necessary. Avoid using abrasive cleaners or solvents that could damage the ABS material.
Polypipe Waste Solvent Weld Coupling - ABS - Female Threaded - 40mm - WhiteFrom £5
Polypipe Soil Waste Reducer - White SO65WFrom £16
Polypipe 110mm Soil Screwed Access Cap Spigot Tail White - SA62WFrom £22
Polypipe Soil Reducer - 110mm x 68mm - Grey - SD46GFrom £11
Polypipe Waste Solvent Weld ABS Expansion Coupling 32mm WhiteFrom £6
Polypipe Waste Solvent Weld Reducer - 50mm x 32mm - WhiteFrom £8
JG Speedfit Reducing Straight Coupler - 15 x 10mm - WhiteFrom £6
McAlpine Solvent Weld Adaptor - ABSCON-42X1.5From £2
Waste Pipe Bend - FloPlast - 40mmFrom £2
Polypipe Waste Solvent Weld Reducer - 50mm x 40mm - WhiteFrom £7
Polypipe 110mm Soil Single Socket Coupling White - SH43WFrom £11
Flomasta Pipe Fitting Adaptor - WhiteFrom £4