Samuel Alexander 15m x 12.5mm Porous Garden Flower Bed Soaker Hose Pipe - Black

The primary benefit is efficient, water-saving irrigation. It delivers water directly to the plant roots, minimizing evaporation and runoff compared to traditional sprinklers.

Yes, multiple lengths can be connected together. You will need a "male to male" hose pipe connector, which is not supplied with this product.

While multiple hoses can be connected, the optimal watering performance may decrease with very long extensions. The exact maximum length depends on your water pressure. We recommend testing for even distribution.

No, this soaker hose is specifically designed for targeted watering of beds, borders, and plants where water can seep directly into the soil around the root zone. It is not suitable for large, open lawn areas.

To clean, disconnect the hose, flush it with water, and use a soft brush or cloth to remove any debris. Ensure it is dry before storing.

A moderate water pressure is recommended. High pressure can cause water to spray out rather than seep, and may damage the hose. Test with a low to medium flow initially.

It is best to lay the hose on the soil surface or under a thin layer of mulch. Burying it too deep may hinder water penetration and make cleaning or repositioning difficult.

Check for kinks in the hose and straighten them. Ensure the water pressure is not too high or too low. Make sure the hose is laid flat on the soil surface.

Reduce the water pressure at the tap. Soaker hoses work best with a gentle, consistent flow.

Ensure the tap is fully turned on. Check that the connector is securely attached to the tap and the hose. Inspect for any blockages within the hose or connector.

Inspect the hose for any punctures or damage. If a significant leak is found, the damaged section may need to be replaced or the hose section removed.