Best current price£28.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£28.00Visit shop National Skirting White Groove Ii Primed Skirting Board 18Mm 170 X 3040Mm
Visit shop
B&Q£31.90Visit shop - National Skirting Groove Ii Mdf Skirting Board - 170mm X 18mm X 3040mmPrimedNo Rebate
Visit shop4 offers from £28.00 - £31.90
View price history by clicking the chart icon.
The National Skirting Groove II Primed Skirting Board is designed for homeowners and contractors looking to achieve a polished, professional finish in interior spaces while providing essential wall protection. Its key benefit lies in the factory-applied white primer, which saves significant time by creating a smooth, ready-to-paint surface that integrates well into both contemporary and classic aesthetics. However, users should note that as a 3040mm length, proper planning for cuts and corner miters is required to minimize wastage during installation.
| Colour | White |
|---|---|
| Series | Groove II |
| Brand | National Skirting |
No, it comes with a white primer finish. It is ready for you to apply your final topcoat of paint or gloss.
This product is designed for general interior use. If installing in a bathroom, ensure all cut ends are fully sealed with paint to prevent moisture absorption.
A combination of high-strength grab adhesive and mechanical fixings (nails or pins) provides the most secure and permanent hold.
Each length is 18mm thick, 170mm high, and 3040mm long.
Yes, the Groove II series features a consistent factory-applied primer designed to provide a uniform base for your final paint application.
Check the wall surface for unevenness; you may need to use a flexible decorators' caulk along the top edge to seal gaps.
Ensure that the board was properly acclimatized to the room temperature before installation and use a quality wood glue on all butt joints.
For the best results, ensure your walls are clean, dry, and dust-free before installation. Use a high-quality adhesive combined with finish nails or pins for a secure bond. When cutting to size, use a sharp miter saw to ensure clean, tight joints at corners. Once installed, lightly sand any joints or filled areas with fine-grit sandpaper before applying your topcoat of paint. For routine maintenance, wipe the boards down with a soft, damp cloth; avoid abrasive cleaners that could damage the paint finish. Periodic inspection for moisture ingress near the base is recommended in wet areas.
