Best current price£8.60from eBay
Shopping.co.uk recommended and popular offers
eBay£8.60Visit shop Varilight MTR250 Dimmer Modules 1-Way Rotary Dimmer Switch Module 40-250W V-Dim
Visit shop
B&Q£8.70Visit shop B&Q - 1-Way Rotary Dimmer 40-250WReplacement Module Mtr250
Visit shop5 offers from £8.60 - £13.67
View price history by clicking the chart icon.
The Varilight V-Dim 40-250W module is designed for homeowners and electricians looking to replace faulty rotary dimmers or upgrade existing faceplates with high-performance V-Dim technology. Its primary benefit is the versatile compatibility with both mains and low-voltage halogen lighting systems, providing smooth brightness control. One caveat is that this module is specifically optimized for incandescent and halogen loads; it is not suitable for LED bulbs, which require dedicated LED-compatible dimmer modules.
| Model Part Number | Mtr250 |
|---|---|
| Brand | Varilight |
No, this specific MTR250 model is designed for incandescent and halogen lighting only. It will not function correctly with LED bulbs.
No, this is a 1-way rotary dimmer module. It is intended for circuits where light control is needed from a single point.
The minimum load required for smooth operation is 40W.
Yes, its compact 38mm x 53mm footprint is designed to fit standard electrical back boxes.
Yes, it is compatible with both mains voltage and low voltage halogen bulbs provided they are used with appropriate transformers.
The module is rated for a maximum load of 250W.
Ensure the total wattage of the connected bulbs is at least 40W. If the load is below 40W, the module may behave inconsistently.
Check the fuse or circuit breaker for the lighting circuit and ensure all wire connections are tight.
Verify that the total load does not exceed 250W and that there is adequate ventilation in the wall box.
Installation should be performed by a qualified individual, ensuring that power is isolated at the mains before beginning. The module is designed to fit into standard UK-style grid systems or behind compatible faceplates. When installing, ensure the wires are securely fastened to the terminals and that the module is not compressed within the back box. For maintenance, keep the rotary dial free of dust and avoid using harsh chemical cleaners on the surrounding faceplate, as these may damage the finish. Ensure the total wattage of the light bulbs connected does not exceed 250W, as exceeding this capacity can cause thermal protection to trigger or permanent component failure.
