Single-Handed 32" Heavy Duty Lazy Tong Hand Riveter Pop Rivet Gun - Toolzone

This riveter is designed for use with aluminum, stainless steel, and steel blind rivets.

It supports rivet sizes of 3/32" (2.4mm), 1/8" (3.2mm), 5/32" (4.0mm), and 3/16" (4.8mm).

Unscrew the existing nozzle and replace it with the correct size for your rivet. The nozzles are usually labeled.

Clean the tool after each use and lubricate moving parts periodically. Store it in a dry place.

Ensure you are using the correct nozzle and rivet size. Apply more pressure, and make sure the rivet is correctly seated.

The riveter's capacity is based on the rivet size. Ensure the material thickness and rivet selection are suitable for this tool.

Replacement nozzles are often available from the manufacturer or online retailers that sell tools and hardware.

Ensure you are using the correct nozzle size for the rivet. Apply more pressure and ensure the rivet is correctly seated in the holes.

Make sure you are not using too large of a rivet. The leverage mechanism might require some oiling. Inspect for any obstructions or debris.

Clear any jammed rivet stems by unscrewing the jaws and removing any obstruction. Clean and lubricate the tool.

Try using a small tool or pliers to gently loosen and remove the stuck nozzle. Ensure it's not cross-threaded.