Cuprinol Garden Shades Protector Wood Paint - Natural Stone

Coverage varies depending on the surface and application method. Refer to the product label for estimated coverage per liter. A tester pot will help to estimate the area to be covered.

This paint is designed for exterior use. Avoid using it on interior surfaces.

You can apply the paint with a brush or spray. Brushing is ideal for smaller areas, while spraying is suitable for larger surfaces.

Priming is recommended for bare wood and surfaces where the paint might not adhere well. Check the product instructions for specific recommendations.

The paint provides 6-year weather protection for wood surfaces.

Yes, but the existing paint must be sound and in good condition. Lightly sand the surface to ensure good adhesion.

Yes, the paint is water-based, making it easy to clean up and environmentally friendly.

Allow the paint to fully dry before exposure to rain. Check the drying time recommended on the product label. If rain occurs before the paint is fully dry, inspect for damage and reapply as needed.

Ensure the surface is properly prepared by cleaning, sanding, and removing any loose particles. Apply a primer if necessary.

Stir the paint thoroughly before and during application. Apply an even coat and avoid applying too much paint in one area.

Ensure the ambient temperature is within the recommended range. Avoid applying the paint in humid conditions. Ensure adequate ventilation.

Ensure the surface is completely dry before painting. Apply the paint in thin, even coats. Avoid applying the paint to surfaces with existing peeling paint.

Apply two coats for optimal coverage. Ensure the paint is applied evenly and at the recommended thickness. Consider using a primer if the surface is particularly porous.