Best current price£29.90from eBay
Shopping.co.uk recommended and popular offers
eBay£29.90Visit shop Bristan Lever Chrome Plated High Neck Pillar Sink Taps - VAL2 HNK C CD
Visit shop
B&Q£41.48Visit shop B&Q - Value High Neck Pillar Kitchen Sink Mixer Taps Hot And Cold Chrome
Visit shop7 offers from £29.90 - £54.96
View price history by clicking the chart icon.
This Bristan Value Lever High Neck Pillar Kitchen Sink Tap is ideal for homeowners seeking a durable, stylish, and functional tap for their kitchen sink. Its modern high neck design offers ample clearance for washing larger items, while the twin lever controls provide precise water management. A potential caveat is its suitability for medium pressure systems (0.5 - 0.9 Bar). Key features include a solid brass body with a chrome finish, ceramic disc valves for a watertight seal, and reinforced metal back nuts for longevity.
| Colour | Silver |
|---|---|
| Model Part Number | VAL2-HNK-C-CD |
| Brand | Bristan |
The tap is designed for medium pressure systems and performs optimally between 0.5 Bar and 0.9 Bar.
Clean regularly with a soft, damp cloth. For tougher marks, use a mild detergent, rinse, and polish with a soft cloth. Avoid abrasive cleaners.
Yes, the Bristan Value Lever High Neck Pillar Kitchen Sink Tap is backed by a 5-year manufacturer's guarantee.
WRAS approval signifies that the tap meets the high standards set by the Water Regulations Advisory Scheme, ensuring it is safe and suitable for use in UK plumbing systems.
This tap is designed for deck mounting and requires two tap holes. It is compatible with sinks that have the appropriate hole configuration.
The tap measures approximately 45mm in width, 165mm in height, and 110mm in depth.
The spout on this model is fixed.
This is often caused by debris in the ceramic disc valve. Turn off the water supply, dismantle the valve mechanism according to the manufacturer's instructions, clean the discs carefully, and reassemble. If the issue persists, the ceramic disc may need replacement.
Check that the water pressure meets the minimum requirement of 0.5 Bar. Ensure the flow restrictors (if present) are not blocked and that the aerator at the tip of the spout is clean and free of debris. Also, verify that there are no blockages in the connecting hoses.
Ensure the metal back nuts securing the tap to the sink are tightened properly. Do not overtighten, as this can damage the sink or tap. If the issue persists, consider using plumber's tape or a sealant for a more secure fit.
Verify that both hot and cold water supplies are connected correctly. Check the pressure of both hot and cold water lines; if one is significantly lower than the other, it can affect temperature control. Ensure the ceramic disc valves are functioning correctly.
Setup:
This tap is designed for deck mounting and requires two tap holes on your sink. Ensure the water supply is turned off before beginning installation. Follow the manufacturer's instructions carefully, paying close attention to securing the reinforced metal back nuts to ensure a stable fit.
Compatibility:
This tap is specifically designed for use with medium pressure water systems, ideally between 0.5 Bar and 0.9 Bar. It is WRAS approved, confirming its compliance with UK water regulations. The tap requires two holes for installation.
Care:
To maintain the shiny chrome finish, regularly clean the tap with a soft, damp cloth. Avoid using abrasive cleaners or scouring pads, as these can scratch the surface. For stubborn marks, a mild detergent can be used, followed by a rinse with clean water and a polish with a soft cloth.
