Best current price£111.99from Wayfair UK
Shopping.co.uk recommended and popular offers
Wayfair UK£111.99Visit shop Cottage Oak Internal Door
Visit shop
B&Q£120.99Visit shop B&Q - Cottage Oak Internal Door
Visit shopB&Q£120.99Visit shop B&Q - Cottage Oak Internal Door
Visit shop13 offers from £111.99 - £133.99
View price history by clicking the chart icon.
The Green & Taylor Cottage Oak Internal Door is designed for homeowners seeking to add timeless, rustic character to their interior spaces through an authentic plank-style aesthetic. It serves as an excellent choice for those renovating period properties or wanting to soften modern interiors with the warmth of North American white oak veneer; however, buyers should be aware that the door arrives unfinished, requiring manual oiling, waxing, or staining prior to installation.
| Brand | Green & Taylor |
|---|
Yes, but you must ensure all surfaces, including the top and bottom edges, are thoroughly sealed with a high-quality oil or varnish to prevent moisture penetration.
No, the door is supplied as a blank. You or your carpenter will need to drill and mortise the door for your chosen handles and latch mechanism.
The standard Cottage Oak Internal Door is not fire-rated. Please verify specific model requirements if fire safety compliance is needed for your project.
Always test your chosen oil, stain, or wax on a small, inconspicuous area (such as the bottom edge) to ensure you are happy with the color before coating the entire door.
No, you must not exceed the 6mm trim limit on the 10mm lippings, as doing so will expose the particleboard core and weaken the door's structure.
The product is covered by a 10-year manufacturer's guarantee against defects in materials and workmanship.
Check if the frame is square and verify if more than 6mm has been removed from any edge; if frame is square, lightly sand the binding edge.
Ensure the door was sanded with fine-grit sandpaper before the initial application and that the finish was applied following the manufacturer's drying time guidelines.
Installation should be performed by a competent carpenter, especially when trimming the door to fit non-standard frames. The 10mm lippings allow for a 6mm reduction on each edge; do not exceed this as it will compromise the structural integrity of the core. Before hanging, ensure the door is acclimatized to the room's temperature for 24-48 hours. For maintenance, clean the surface periodically with a soft, dry cloth. If the finish begins to dull, re-apply a light coat of the original wax or oil used during the initial installation to refresh the oak grain.
