SIP FIREBALL Radiant Propane Heater RP15 - Black

Follow the manufacturer's instructions to securely connect the propane tank to the heater. Ensure all connections are tight and free of leaks.

The heater requires good ventilation to ensure proper combustion and to prevent the buildup of carbon monoxide. Always operate it in a well-ventilated area.

Use the gas flow control knob to adjust the heat output. Turning the knob will increase or decrease the flame, thereby controlling the heat.

The heater is equipped with a tip-over and flame-out cut-off safety device that automatically shuts off the unit if it tips over or if the flame extinguishes.

Allow the heater to cool completely before storing it. Store it in a dry place, away from direct sunlight and extreme temperatures.

This heater can be used indoors, but it *must* be in a space with adequate ventilation to prevent the buildup of harmful gases. Ensure there is sufficient airflow.

Wipe the exterior surfaces with a damp cloth. Do not use abrasive cleaners. Ensure the heater is off and cool before cleaning.

Check the propane tank connection, ensure the tank has fuel, and verify the ignition switch is functioning. Check the battery if the igniter uses one.

Check the gas flow control and adjust as needed. Ensure the burner is clean and free of debris. Check for any obstructions in the fuel line.

Immediately turn off the heater and check all connections for leaks. Ensure proper ventilation.

Check if the tip-over or flame-out safety device has been triggered. Ensure the heater is on a stable surface and that there are no drafts.