DeWalt Extreme Masonry Drill Bit - 5 x 85mm

This drill bit is suitable for masonry, brick, stone, tiles and light concrete.

The shank size is 5mm.

Clean the drill bit after each use. Store it in a dry place and inspect it for wear and tear before each use.

Yes, it can be used with a hammer drill, especially for harder materials like dense concrete.

Check the drill speed and pressure. Inspect the bit for damage or wear. Make sure the bit is appropriate for the material.

Reduce pressure and drill speed. Ensure the drill is aligned correctly and inspect the bit for pre-existing damage.

The anti-slip shank provides a secure grip in the drill chuck, preventing slippage during drilling.

The unique carbide grade optimizes durability and ensures longer life for the drill bit.

Check the drill speed and pressure. Ensure you are using the correct setting for the material. Check for any damage or wear on the bit.

Reduce pressure and drill speed. Ensure the drill is aligned correctly. Inspect the bit for any pre-existing damage.

Tighten the chuck securely. Ensure the shank of the drill bit is clean and free of debris.

Start with a slower speed. Use a center punch to create a starting point. Apply even pressure and consider using masking tape on the tile surface.