Setup, Compatibility & Care
Setup:
- Acclimatize: Allow the skirting boards to acclimatize to room temperature for at least 48 hours before installation.
- Measure and Cut: Accurately measure the wall lengths and cut the boards to size using a fine-tooth saw for clean edges. Mitre cuts are recommended for corners.
- Prepare Surface: Ensure walls are clean, dry, and free from dust and debris. Apply an appropriate adhesive or fixings (nails/screws) according to your wall type and preference.
- Install: Apply adhesive to the back of the board or use fixings to attach securely to the wall, ensuring a snug fit at the top edge.
Compatibility:
This skirting board is compatible with most standard wall types, including plasterboard, brick, and stud walls, provided appropriate fixings are used. It is designed to work with standard flooring installations and can be painted with most water-based or oil-based paints. Ensure compatibility with your chosen paint finish (e.g., matt, satin, gloss).
Care:
- Cleaning: Wipe clean with a slightly damp cloth. Avoid using abrasive cleaners or excessive moisture.
- Maintenance: The primed surface should be painted within a reasonable timeframe. If the painted surface becomes marked, it can usually be repainted after a light sanding.