Shopping.co.uk

PixMax Heat Press - 38cm

PixMax Heat Press - 38cm

Bring your designs to life with this superb creative bundle. Using the heat press could not be eas...

Best current price£855.00from wilko

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £855.00

View price history by clicking the chart icon.

wilkoPixMax 38cm Swing Heat Press 720mm Vinyl Cutter Multi
Free delivery in 1–3 days
£855.00
Visit shop

Product Information

Full details

This PixMax Heat Press bundle is designed for creators looking to bring their custom designs to life on various materials. Its primary benefit is the versatility offered by the combination of a swing heat press and a vinyl cutter, enabling professional-quality custom apparel and signage. A potential caveat is the learning curve associated with mastering both the heat press and vinyl cutter for optimal results.

All features

ColourMulticolor
Seriesstring
Model Part Number10565
BrandPixMax

Extended Product Information

FAQs

What materials can I use the heat press on?

The heat press is suitable for a wide range of materials including cotton, polyester blends, mugs, plates, and metal blanks when using appropriate sublimation paper and techniques.

How do I connect the vinyl cutter to my computer?

Connect the vinyl cutter to your computer using the provided USB cable. You will need to install the specific drivers and the compatible SignCut Pro software. Refer to the instruction manual for detailed steps.

What is the warranty period for this bundle?

The PixMax bundle includes a 1-year electrical warranty.

Can I use regular ink in the included printer?

No, the printer is supplied with sublimation cartridges and is intended for use with sublimation ink only for heat transfer applications.

What is the maximum width of vinyl the cutter can handle?

The vinyl cutter has a maximum cutting width of 720mm (approximately 28 inches).

How is the heat distribution on the press?

The heat press is designed for even heat distribution across the platen to ensure consistent results.

What software is compatible with the vinyl cutter?

The vinyl cutter is compatible with SignCut Pro (a 12-month subscription is included) and FlexiStarter software.

Troubleshooting

Heat press not heating up

Ensure the power cord is securely connected. Check the fuse if applicable and verify that the temperature and time settings are correctly entered and the press is activated.

Vinyl cutter not cutting accurately

Clean the optical sensor. Ensure the vinyl is loaded straight and the blade is sharp and properly installed. Recalibrate the cutter if possible and check software settings.

Uneven heat application on the press

Ensure the silicon pad is clean and free of debris. Check that the pressure is adjusted correctly and evenly distributed across the surface. Allow the press to reach the set temperature fully.

Printer not printing with sublimation ink

Verify that genuine sublimation ink cartridges are installed. Run printer head cleaning cycles as per the printer's manual. Ensure the correct paper type is selected in the print settings.

Designs peeling or fading after pressing

Confirm correct temperature, pressure, and time settings for the specific material being used. Ensure the sublimation paper and ink are suitable for the fabric. Allow adequate cooling time before handling.

Pros and Cons

Pros

  • Provides a complete solution for custom product creation with heat press and vinyl cutter.
  • Swing-away heat press design enhances safety and accessibility.
  • Integrated printer and sublimation supplies offer immediate use.
  • Vinyl cutter features an optical eye for accurate cutting.
  • Adjustable pressure and temperature settings allow for precise customization.

Cons

  • Requires a learning curve for both heat press and vinyl cutter operation.
  • Compatibility with Mac is limited to version 10.7.
  • The included printer may have specific ink requirements for sublimation.
  • Warranty is limited to 1 year.

Setup, Compatibility & Care

Setup:

  1. Unpack all components carefully.
  2. Assemble the stand for the vinyl cutter and attach the cutter.
  3. Connect the vinyl cutter to your computer via USB and install the necessary drivers and SignCut Pro software. Ensure your operating system is compatible (Windows or Mac up to 10.7).
  4. Connect the heat press to a suitable power outlet. Familiarize yourself with the control panel and adjust initial settings as per the instruction manual.
  5. Install sublimation cartridges into the printer and load sublimation paper.

Compatibility:

  • Vinyl Cutter: Compatible with Windows and Mac OS (up to version 10.7). Works with SignCut Pro and FlexiStarter software.
  • Heat Press: Operates on standard 90-260V power supply.

Care:

  • Heat Press: Wipe the platen with a clean, dry cloth when cool. Avoid abrasive cleaners. The silicon pad can be wiped with a damp cloth.
  • Vinyl Cutter: Keep the cutting blade clean and replace it when dull. Dust the machine with a dry cloth. Ensure the optical sensor is clean for accurate cutting.
  • Printer: Use only sublimation ink cartridges. Follow the printer manufacturer's guidelines for maintenance and cleaning cycles to prevent nozzle clogs.

Price History

DatePrice
Visit shop