Rust-Oleum uPVC Paint - Grey

Perfect for recolouring worn and weathered uPVC doors, windows, drainpipes and gutters, the highly...

Best current price£31.99from B&Q

One Offer

1 offer from £31.99

View price history by clicking the chart icon.

B&QB&Q - Tyne Fog Matt Upvc Paint 750Ml
Free delivery in 1–3 days
£31.99
Visit shop

Product Information

Full details

This guide is for homeowners seeking to refresh and protect their uPVC doors, windows, and other exterior features with Rust-Oleum uPVC Paint - Grey. The key benefit is a long-lasting, weather-resistant finish that revitalizes tired surfaces for up to 10 years. Keep in mind that proper surface preparation is crucial for optimal results.

All features

ColourGrey
BrandRust-Oleum

Extended Product Information

FAQs

How long does the paint last?

The paint is designed to resist cracking, peeling, and blistering for up to 10 years.

Can I use this paint on other surfaces?

This paint is specifically formulated for uPVC and composite materials. It is not recommended for other surfaces unless compatibility is confirmed.

How many coats are needed?

Two coats are recommended for the best coverage and durability.

Can I use a sprayer to apply the paint?

Yes, you can use an electric sprayer. Dilute the paint with water (10-20%) for optimal results.

How long does it take for the paint to dry?

The paint is usually touch dry in about 1 hour.

Is the paint weather-resistant?

Yes, the paint is weather-resistant and designed for exterior use.

Is the paint low odour?

Yes, this paint is water-based and has virtually no odour.

Where can I find the tester sachets?

Tester sachets are available to help you choose the perfect colour.

Troubleshooting

Paint is peeling or blistering.

Ensure the surface was properly prepared (cleaned and lightly sanded). Allow adequate drying time between coats.

Uneven finish or runs in the paint.

Apply thinner coats and avoid excessive paint buildup. Ensure proper dilution if using a sprayer.

Paint not adhering to the surface.

Make sure the surface is clean, dry, and free of any contaminants. Consider lightly sanding the surface for better adhesion.

Pros and Cons

Pros

  • Provides a smooth matt finish.
  • Cost-effective alternative to replacing uPVC features.
  • Resists mould and is weather-resistant.
  • Touch dry in just 1 hour.
  • Available in tester sachets to help you choose the right colour.

Cons

  • Requires proper surface preparation for optimal results.
  • May require two coats for full coverage.
  • Spraying requires dilution for best results.

Setup, Compatibility & Care

  1. Surface Preparation: Clean the uPVC surface thoroughly with a suitable cleaner to remove dirt, grease, and loose particles. Lightly sand glossy surfaces to improve adhesion.
  2. Application: Apply the paint using a brush, roller, or electric sprayer. Follow the manufacturer's instructions for application and drying times.
  3. Coats: Two coats are recommended for full coverage and optimal durability.
  4. Drying Time: The paint is typically touch dry in about 1 hour. Allow sufficient time for the paint to fully cure before exposing the surface to harsh weather.
  5. Spraying: When using a sprayer, dilute the paint with water (10-20%) as required to achieve a smooth finish.
  6. Compatibility: This paint is specifically designed for uPVC and composite materials. It is not recommended for use on other surfaces unless compatibility is confirmed.

Price History

DatePrice
Visit shop