Best current price£24.37from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£24.37Visit shop Wing Mirror Glass Right Compatible With Skoda Yeti 20092017 Stickon Driver Off Side With Blind Spot 5902631210856
Visit shop1 offer from £24.37
View price history by clicking the chart icon.
This replacement wing mirror glass by Less4Spares is designed for Skoda Yeti owners (2009-2017) seeking an affordable, high-quality solution to replace broken or degraded driver-side mirror glass. Featuring a wide-angle design with a built-in blind spot indicator, it significantly enhances visibility and safety during lane changes, though users should note that the installation relies on an adhesive backing rather than a traditional mechanical clip-in mechanism.
| Brand | Less4Spares |
|---|
This replacement glass is primarily designed as a stick-on overlay and does not include an integrated heating grid.
This specific unit is designed for the right-hand (driver) side of the vehicle.
If the old glass is broken, remove any loose shards carefully. You can stick this over a solid backing plate or directly onto the housing if the surface is flat and clean.
No, this product is specifically manufactured for the 2009-2017 model range.
The adhesive is strong and meant to be permanent. Removing it may risk breaking the new glass or damaging the housing.
Ensure the underlying surface was free of dust and wax; if it remains loose, apply additional automotive-grade adhesive tape or silicone sealant.
Check that the glass is pressed flat against the backing plate and ensure there is no trapped debris between the surfaces.
To install this mirror glass, ensure the target surface is completely clean, dry, and free of any debris, grease, or old adhesive residue; using an isopropyl alcohol wipe is recommended for the best bond. Simply peel the backing from the adhesive strips and press the glass firmly against the housing or existing backing plate, ensuring it is aligned correctly before applying full pressure. Once installed, avoid driving the vehicle for at least 24 hours to allow the adhesive to reach maximum strength. For maintenance, clean the surface only with a soft microfiber cloth and standard glass cleaner to avoid scratching the surface or damaging the adhesive bond.
