Best current price£112.49from GhostBikes.com
Shopping.co.uk recommended and popular offers
GhostBikes.com£112.49Visit shop Polisport Grey Full Plastics Kit - Ktm Sx 125/150/250 & Sxf 250/350/450 2019-22
Visit shop8 offers from £112.49 - £144.99
View price history by clicking the chart icon.
The Polisport Full Plastics Kit in Grey is designed for KTM SX 125/150/250 and SXF 250/350/450 models from 2019-2022, offering enhanced durability and a fresh aesthetic for off-road riders. Its key benefit lies in superior protection and a gloss finish derived from injected DGP (Durable Gloss Polypropylene) technology, which is more resistant than OEM plastics. A potential caveat is that while designed for OEM fitment, careful alignment might be needed during installation.
| Model Part Number | 90814 |
|---|---|
| Brand | Polisport |
DGP stands for Durable Gloss Polypropylene. This is Polisport's proprietary injected plastic technology, which results in parts that are highly resistant to damage and maintain a high-gloss finish, outperforming standard OEM plastics in durability and appearance.
No, this specific kit is designed and manufactured for precise fitment on KTM SX/SXF/XC/XC-F models from the 2019 to 2022 model years only. Compatibility with other years is not guaranteed.
Generally, no. Standard motorcycle hand tools (wrenches, screwdrivers, Allen keys) are typically sufficient for installation. The kit is designed for a straightforward, bolt-on replacement using existing mounting points.
The DGP material offers good resistance to everyday wear and tear, including minor scratches from trail debris. However, like all plastic components, they can still be scratched by sharp impacts or abrasive materials.
While the kit is designed for OEM fitment, mixing new Polisport parts with older, potentially faded or worn OEM plastics might result in a slight visual difference in color and sheen. However, they should physically fit together correctly.
The Polisport Full Plastics Kit comes supplied in a specially designed box intended to protect all the individual plastic components from damage during shipping and handling.
Double-check that you are using the correct part for the specific location on the bike and that the bike model and year match the kit's specifications. Ensure no old mounting hardware is obstructing the fitment. Loosen nearby installed plastics slightly to allow for adjustment, then re-tighten once aligned.
Avoid using harsh chemicals or abrasive pads. Use a soft microfiber cloth and a mild, pH-neutral cleaner. If the dullness persists, a specialized plastic polish designed for high-gloss finishes might be effective, but always test in an inconspicuous area first.
Contact the retailer immediately with photographic evidence of the damage. The kit is shipped in protective packaging, but damage can occur during transit. The retailer should be able to assist with a replacement part.
Compatibility:
This kit is specifically designed for the following KTM models:
Setup:
Installation is designed to be quick and easy, utilizing OEM fitment points. Ensure all mounting hardware from your original plastics is retained or replaced with appropriate new hardware. It's recommended to install parts systematically, perhaps starting with the fenders and working towards the radiator shrouds and side panels. While designed for OEM fit, test fitting each component before final tightening can help ensure perfect alignment.
Care:
To maintain the gloss finish and longevity of the plastics, clean them regularly after each use. A soft cloth with mild soap and water is sufficient for most dirt and grime. Avoid abrasive cleaners or solvents, as these can damage the DGP finish. The fade-resistant properties mean that protection from prolonged, direct sunlight is less critical than with standard plastics, but regular cleaning will still yield the best results.
