Best current price£35.46from eBay
Shopping.co.uk recommended and popular offers
eBay£35.46Visit shop Upol PLAS/5LG Plast X LIGHT GREY PAINT Plastic Bumper Trim Aerosol U-Pol X 2
Visit shop2 offers from £35.46 - £38.54
View price history by clicking the chart icon.
The U-Pol Plast X Plastic Bumper Trim Aerosol is an ideal solution for automotive enthusiasts and DIY restorers looking to refresh faded or scuffed plastic components. Designed specifically for exterior plastic bumpers and trim, this paint provides a professional-grade satin finish that restores the original aesthetic of vehicle parts. While it offers excellent adhesion and quick drying times, users must ensure the surface is properly primed and cleaned beforehand to achieve the best results, as it is not a direct-to-substrate paint for all plastic types.
| Colour | Grey |
|---|---|
| Model Part Number | PLAS/5LG/2 |
| Brand | U-Pol |
Yes, this paint is designed for use on suitably primed plastic components to ensure long-lasting adhesion.
While formulated for bumpers and exterior trim, it can be used on interior plastics, provided they are primed and cleaned correctly.
A standard passenger car bumper can typically be covered by one can, but the two-pack ensures you have enough for multiple coats or touch-ups.
The Plast X formula is designed specifically to provide a satin finish, falling between matte and high-gloss.
Due to its fast-drying properties, you should generally wait about 10-15 minutes between coats depending on ambient temperature.
Once fully cured, it provides a durable layer resistant to standard washing, though high-pressure power washers should be used with caution.
This usually indicates the surface was not properly cleaned or primed; sand back, re-clean, and apply a plastic adhesion primer before repainting.
You may be holding the nozzle too far from the surface causing the paint to dry before landing; move closer while maintaining steady, even strokes.
Turn the can upside down and spray for 3-5 seconds to clear the valve after each use, or soak the nozzle in thinners.
To prepare for application, ensure the environment is between 15-25 degrees Celsius and free from dust. Surfaces must be thoroughly cleaned with a plastic cleaner and lightly sanded with fine-grit abrasive to ensure mechanical adhesion. Always apply a plastic-specific primer before using the Plast X coat. For care, once fully cured, the surface can be maintained with standard automotive plastic cleaners. Avoid using harsh solvents on the finished surface to maintain the integrity of the paint layer. Always shake the aerosol can vigorously for at least two minutes before beginning your first coat.
