3M Car Body Schutz Aerosol - 500ml - Black
Best current price£21.10from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£21.10Visit shop 3M Car Body Schutz Aerosol 500ml - Black Underseal + Underbody Coating
Visit shopeBay£21.10Visit shop All Offers
3 offers from £21.10 - £22.72
View price history by clicking the chart icon.
eBay3M Car Body Schutz Aerosol 500ml - Black Underseal + Underbody Coating
Free delivery in 1–3 days
£21.10
Visit shop
OnBuy.com3M Car Body Schutz Aerosol 500Ml - Underseal + Underbody Coating Black 3513577987980
Free delivery in 1–3 days
£22.72
Visit shop
3M Car Body Schutz Aerosol 500Ml - Black Underseal + Underbody CoatingFree delivery in 1–3 days£22.72Visit shop →
Product Information
Full details
The 3M Car Body Schutz Aerosol is designed for automotive enthusiasts and professional technicians who need a reliable, rubberised protective coating for vehicle chassis and wheel arches. Its primary benefit is the fast-drying, durable barrier it creates against corrosion, road salt, and debris, which significantly extends the lifespan of exposed metal components. However, users should note that as an aerosol application, achieving a perfectly uniform finish requires careful technique and multiple thin layers rather than one heavy application.
All features
| Model Part Number | 3M Spray Body Schutz Rubberised Fast Drying |
|---|---|
| Brand | 3M |
Extended Product Information
FAQs
Can this be painted over?
It is generally recommended as a top-coat for underbody areas. If you intend to paint over it, check the technical data sheet for compatibility with specific top-coat systems.
Is this product suitable for interior floor pans?
While intended for underbody use, it can be used on interior floor pans if properly ventilated during application to allow solvents to escape.
How many cans do I need for a full wheel arch set?
Generally, 1-2 cans are sufficient for a standard set of wheel arches, depending on the desired thickness and surface area.
Does it need to be baked to cure?
No, it is a fast-drying air-cure product. No oven baking or heat lamps are required.
Can I use this on plastic parts?
It is formulated for metal surfaces. Adhesion to plastics may vary, so it is recommended to test on an inconspicuous area first.
Troubleshooting
The coating appears uneven or runny.
You are likely applying the product too heavily. Use lighter, multiple passes rather than one thick layer, and ensure you maintain a consistent distance from the surface.
The spray nozzle is clogging.
Clear the nozzle by removing it and soaking it in solvent, or ensure you clear the line by inverting the can and spraying after every use.
Poor adhesion to the metal surface.
Verify that the surface was completely free of wax, oil, or rust prior to application. Use a proper automotive degreaser to prepare the metal.
Pros and Cons
Pros
- Easy to apply without complex spray equipment
- Provides a durable, flexible rubberised layer
- Quick drying time increases work efficiency
- Excellent adhesion to automotive metal surfaces
- Effective at sound dampening in wheel wells
Cons
- Aerosol format can be messy if not applied in a controlled environment
- Requires proper surface preparation for long-term adhesion
- Limited to smaller surface areas compared to bulk spray systems
Setup, Compatibility & Care
Before application, ensure the vehicle surface is thoroughly cleaned of grease, dirt, and loose oxidation using a degreaser or solvent. Mask off surrounding body panels to prevent overspray, as the coating can be difficult to remove once dry. Shake the aerosol can vigorously for at least one to two minutes to ensure the rubber compounds are properly mixed. During application, hold the can approximately 8-12 inches from the surface. Once finished, clear the nozzle by turning the can upside down and spraying until only propellant escapes. Store in a cool, dry place away from direct sunlight to maintain the integrity of the formula.