Best current price£8.50from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£8.50Visit shop Soudal Orange Soudabond Plasterboard Gun Grade* 750Ml 161151
Visit shop2 offers from £8.50 - £11.93
View price history by clicking the chart icon.
Soudabond Plasterboard Adhesive Foam is designed for professional contractors and DIY enthusiasts looking to streamline wallboard installation. Its primary benefit is the dramatic reduction in project timelines, allowing for faster curing and finishing compared to traditional cement-based mortars. While it offers superior efficiency and ease of use, it requires a dedicated foam applicator gun to ensure correct application and optimal bead size.
| Colour | Orange |
|---|---|
| Model Part Number | 161151 |
| Brand | Soudal |
Soudabond is an adhesive; always consult local building regulations to determine if mechanical fasteners are required in addition to the foam.
The adhesive provides rapid grab, but you should always follow board manufacturer recommendations regarding temporary support during the curing phase.
Uncured foam can be cleaned with a dedicated solvent cleaner, but cured foam must be removed mechanically with a scraper.
This product is formulated for internal construction tasks and is not intended for long-term exposure to external weather conditions.
You can typically begin finishing work or plastering one hour after the boards have been bonded, provided the environmental conditions are standard.
Check if the flow-control screw on the back of the gun is tightened too far; rotate counter-clockwise to increase flow.
Ensure the substrate surface is free from loose dust, grease, or oil, as these prevent proper adhesion.
Before use, ensure the canister is at room temperature and shake vigorously for at least 30 seconds. Screw the canister onto your professional applicator gun by turning it clockwise until tight. To start, point the gun downward and pull the trigger until the adhesive flows evenly. Always adjust the flow-control screw on the back of the gun to manage the bead width based on the surface flatness. After use, do not remove the canister if there is material remaining; leave it attached to the gun to keep the internal mechanism pressurized and clear. If storing for long periods, flush the gun nozzle with a dedicated foam cleaner.
Soudal Expanding Foam B3 Gun Grade 750mlFrom £6
Soudal Sealant - 290mlFrom £7
Soudal Sealant - GreyFrom £7
Soudal High Temperature Fire Cement - BlackFrom £4
Soudal Trade Sanitary Silicone - WhiteFrom £4
Soudal Trade All Weather Sealant - BlackFrom £7
Soudal Grip All Adhesive - WhiteFrom £3
Soudal B2 Fire Rated Expanding Foam Hand Held 750mlFrom £8
Soudal Exterior Frame Silicone - WhiteFrom £4
Commodity Milk+ Bold Eau De Parfum - 10mlFrom £30
Everbuild Constructa Pro Adhesive Foam Gun Grade 750ml - GreyFrom £10
Commodity Paper+ Bold Eau De Parfum - 10mlFrom £30