Best current price£15.99from eBay
Shopping.co.uk recommended and popular offers
eBay£15.99Visit shop 4x Bartoline Ready Mix Wood Filler White Flexible Adhesion Door Repair 330g
Visit shop
B&Q£24.99Visit shop B&Q - 4X Ready Mix Wood Filler White Flexible Adhesion Door Repair 330G
Visit shop3 offers from £15.99 - £24.99
View price history by clicking the chart icon.
Bartoline Ready Mix Wood Filler is an ideal solution for DIY enthusiasts and professionals looking to repair minor damage on internal or external wood surfaces such as window frames, doors, and skirting boards. Its primary benefit is a highly flexible, easy-to-apply formula that accepts paint, varnish, or stain for a seamless finish; however, it is important to note that this product is not intended for use in areas that remain permanently wet or submerged.
| Model Part Number | RM0210 |
|---|---|
| Brand | Bartoline |
Yes, but it must be sealed with an oil-based paint or varnish immediately after drying to protect it from moisture.
For optimal results, fill to a maximum thickness of 6mm per layer.
Yes, once the filler is completely dry and sanded, it is compatible with most paints, stains, and varnishes.
No, this product is not suitable for areas that are permanently wet or submerged in water.
Apply the filler slightly above the surface level, let it dry, and then sand it down until it is flush with the surrounding wood.
The hole was likely too deep. Ensure future applications are done in layers of no more than 6mm, allowing each layer to dry completely.
The wood surface may have been damp or dusty. Clean thoroughly with a cloth and ensure the wood is bone dry before re-applying.
Before application, ensure the substrate is clean, dry, and free from all dust, grease, and loose debris. If you are dealing with a deep gouge, apply the filler in increments of 6mm, allowing sufficient drying time between each layer. Always apply the product slightly above the surface level to allow for proper leveling during the sanding phase. When working outdoors, ensure the area is fully sealed with a weather-resistant topcoat. Avoid using this product on surfaces prone to standing water or constant saturation, as it is not designed to function in damp environments.
