Best current price£9.00from Hobbycraft Trading Ltd
Shopping.co.uk recommended and popular offers
Hobbycraft Trading Ltd£9.00Visit shop Siser Red/Blue/Yellow Holographic Heat Transfer Vinyl : 30X50cm
Visit shop1 offer from £9.00
View price history by clicking the chart icon.
Siser Holographic Heat Transfer Vinyl is designed for crafters and designers looking to add vibrant, color-changing depth to their apparel and accessories. It offers a professional, rhinestone-like finish that is durable and easy to apply; however, because it is a thicker material at 105 microns, it requires precise cutting settings and consistent heat application to ensure optimal adhesion.
| Model Part Number | 1FHOLO-MU-3050 |
|---|---|
| Brand | Siser |
Yes, Siser Holographic HTV is compatible with all standard home plotters, including Cricut and Silhouette models.
No, the vinyl comes with a built-in sticky carrier sheet that acts as both the backing for the vinyl and the application sheet.
It is recommended to hang dry for the longevity of the holographic finish, though the material is tested for 40°C washing.
No, this material is designed for cotton, polyester, and cotton/poly blends and will not adhere properly to nylon or treated waterproof textiles.
Always use a dry setting; steam can introduce moisture that interferes with the thermo-adhesive backing.
Ensure that the recommended 160°C temperature was reached and that enough pressure was applied; verify the fabric was pre-pressed to remove moisture.
Check your blade depth; since the material is 105 microns, a slightly deeper cut or a new blade may be required to ensure clean lines.
This is often caused by excessive heat duration; reduce the time slightly or ensure the heat press is calibrated correctly to 160°C.
To prepare your vinyl, cut the design in mirror image on your cutting plotter. Weed away the excess material to reveal your design. For application, preheat your fabric to remove moisture. Apply the vinyl at 160°C for 15-20 seconds. If using a home iron, use a firm setting without steam and keep the iron stationary to prevent shifting. Wait 24 hours after application before the first wash. Turn the garment inside out before machine washing at a maximum of 40°C to protect the holographic finish from friction and damage.
