Best current price£6.80from The Range
Shopping.co.uk recommended and popular offers
The Range£6.80Visit shop Unifix Coach Screws Hexagon Head Din 571 Bright Zinc Plated Ce - M6 X 20 (Box Of 200) - White
Visit shop44 offers from £6.80 - £10.28
View price history by clicking the chart icon.
This guide is for builders, woodworkers, and DIY enthusiasts who need reliable fasteners for wooden structures. The Unifix Coach Screws M10 x 130 offer a secure and durable fastening solution with ease of installation. A key consideration is ensuring the screw is appropriate for the specific wood type and load requirements.
| Model Part Number | Hxc10 130 000 |
|---|---|
| Brand | Unifix |
Unifix Coach Screws M10 x 130 are suitable for a wide range of softwoods and hardwoods. For very dense hardwoods, careful pilot hole drilling is essential.
You will need a socket wrench or spanner that fits the M10 hexagon head. Standard drive bits for impact wrenches or drills can also be used if they are the correct size.
BZP (Bright Zinc Plating) provides a protective layer that enhances corrosion resistance, helping to prevent rust and extend the lifespan of the screw, especially in outdoor or humid environments.
Yes, the BZP finish offers good protection for outdoor use. However, for continuous exposure to harsh weather, additional protective measures like sealing may be beneficial.
DIN 571 is a German Institute for Standardization (Deutsches Institut für Normung) standard specifying requirements for hexagon head wood screws, ensuring quality and performance consistency.
Yes, due to their robust M10 size and design, they are suitable for structural applications in wood where strong load-bearing connections are required.
Coach screws and lag screws are essentially the same type of fastener, characterized by a hexagon head and a coarse thread designed for wood. The term 'coach screw' is more common in some regions.
Ensure a pilot hole of the correct diameter has been drilled. The hole may be too large for the screw; try a smaller pilot hole or use a screw with a larger diameter if appropriate for the load.
Use the correct size socket or wrench. Ensure the tool is fully seated on the head. Apply steady, even pressure. If stripping has occurred, you may need to use locking pliers to remove the screw and start again with a new one.
Verify the pilot hole is adequate and not clogged with debris. The wood may be exceptionally dense; a slightly larger pilot hole might be necessary, or consider a screw with a more aggressive thread if available.
BZP is a protective finish but not impervious to all environments. Clean the affected area and apply a suitable metal primer and paint for added protection, especially in coastal or high-humidity areas.
Setup:
Compatibility:
These coach screws are designed for use with hardwoods and softwoods. They are not intended for direct use in metal or masonry without appropriate anchors or preparation.
Care:
While the BZP (Bright Zinc Plating) finish offers good corrosion resistance, it is advisable to:
