Rope Clip Clamp - 6 mm - Egg Shape - SolaDirect

Its primary purpose is to securely fasten the loose end of a loop back onto the main rope, creating a strong termination point for various applications.

This clamp is suitable for wire rope, jute rope, and polypropylene rope.

The specified diameter of the clamp corresponds to the size of the rope it is intended for. For this product, the 6 mm clamp is for 6 mm diameter ropes.

Yes, it is designed for easy integration with other cables and equipment such as thimbles and turnbuckles, commonly used in rigging.

For a secure and reliable termination, it is generally recommended to use at least two or three clamps per loop, depending on the rope size and application, spaced appropriately.

The U-bolt part should always be placed on the standing part of the rope (the continuous length), and the saddle part should be on the dead end (the loose end forming the loop).

Yes, it is highly recommended to re-tighten the nuts after the rope has been subjected to load, as the rope may compress and reduce tension in the clamp.

Ensure the correct clamp size is used for the rope diameter. Verify that the U-bolt is on the standing part and the saddle on the dead end. Re-tighten the nuts evenly and check for rope compression.

Ensure the threads are clean and free of debris. Use an appropriate wrench for the nut size. If the nuts are seized, apply a penetrating lubricant and wait before retrying.

For minor surface corrosion, clean with a wire brush. For significant corrosion, the clamp may need replacement to ensure safety and load-bearing capacity.