Caleffi Danfoss Straight TRV Body - DN15 1/2 - 105-1502

Best current price£40.58from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
Caleffi Danfoss Dn15 1/2 Straight Trv Body 105-1502
Visit shop
Best current price£40.58from City Plumbing GB
Shopping.co.uk recommended and popular offers
Caleffi Danfoss Dn15 1/2 Straight Trv Body 105-1502
Visit shop1 offer from £40.58
View price history by clicking the chart icon.
The Caleffi Danfoss Straight TRV Body (105-1502) is a professional-grade thermostatic radiator valve designed for commercial and residential central heating systems, ideal for building managers and heating technicians looking for precise flow control. It provides the essential benefit of granular temperature regulation for radiators, heated ceilings, and fancoils; however, users should note that the thermostatic or manual controller head is typically sold separately and must be compatible with the Danfoss connection interface.
| Model Part Number | 105-1502 |
|---|---|
| Brand | Caleffi |
No, the 105-1502 is the valve body only. A compatible thermostatic or manual head must be purchased separately.
No, the maximum working pressure for this valve is 10 bar. Exceeding this rating can lead to mechanical failure.
Yes, this model is a DN15 size, which corresponds to a standard 1/2-inch connection.
Yes, it is designed to integrate with remote sensors for controlling flow to both heated ceilings and fancoils.
The valve is rated for a maximum working temperature of 100°C.
Check if the valve pin is stuck due to inactivity; remove the controller and gently press the pin to ensure it moves freely.
Tighten the packing gland nut slightly or consult a professional if the internal O-ring seal requires replacement.
The flow rate may be too high; adjust the system's balancing valve or the TRV's internal setting if applicable to reduce velocity.
Installation should be performed by a qualified heating engineer to ensure all joints are properly sealed using approved pipe sealant or PTFE tape. Ensure the system is drained before removing old hardware to prevent leakage.