Best current price£88.06from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£88.06Visit shop Sam Mouldings Grey Double Tongue Andamp; Groove Mdf Cladding - 194Mm X 4.88Mtr Primed
Visit shop2 offers from £88.06
View price history by clicking the chart icon.
The SAM Mouldings Double Tongue and Groove Cladding is designed for contractors and DIY enthusiasts who require a high-quality, professional finish for interior wall or ceiling projects. This grey primed cladding offers a robust and versatile solution for covering large surface areas efficiently, though users should note that the 4.88-meter length requires adequate transport and storage space due to its size.
| Model Part Number | SAM004-064178 |
|---|---|
| Brand | SAM Mouldings |
This product is primarily for interior use. If used in high-humidity areas, it must be thoroughly sealed with high-quality moisture-resistant paint.
No, the product comes grey primed and is ready for a topcoat of your preferred paint.
You will need a saw for cutting to length, a level, a hammer or pneumatic nailer, and wood adhesive.
Yes, this length is optimized for standard room heights and long wall runs, though it does require professional transport.
It is recommended to install a framework of wooden battens onto the brickwork first to provide a level surface and a point of attachment for the cladding.
Divide the total width of your wall by 0.194 meters and add 10% to account for cuts and wastage.
Check for debris or paint buildup in the groove. Gently clear the channel and ensure the board is held at the correct angle before engaging the tongue.
This is often due to failure to acclimatize the wood. Ensure future boards are stored in the room for 48 hours prior to installation to account for moisture and temperature changes.
Use a clamp to pull the board into alignment against the previous board while fixing it to the support batten.
Before installation, ensure the product is stored in a clean, dry environment, lying flat to prevent bowing. Allow the boards to acclimatize to the room temperature for 24-48 hours before fitting.
For cleaning, use a soft, dry microfiber cloth to remove dust. If minor scuffs occur, they can be easily touched up with a small amount of matching paint.
