Best current price£249.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£249.99Visit shop B&Q - Fulford 3 In 1 Instant Hot Water Kitchen Sink TapTank And FilterBrushed Steel
Visit shop2 offers from £249.99
View price history by clicking the chart icon.
This Balterley 3-in-1 Instant Hot Water Kitchen Sink Tap in Silver is designed for homeowners seeking both enhanced kitchen functionality and a modern aesthetic. Its key benefit is providing instant access to hot water, saving time and energy, though its complex installation may require professional assistance. The tap features a high-quality brushed steel finish, an energy-efficient 2.4L insulated boiler tank with adjustable temperatures (75°C-98°C), and an integrated carbon filter for purified water.
| Colour | Silver |
|---|---|
| Brand | Balterley |
The boiler tank has a capacity of 2.4 litres.
The temperature can be adjusted digitally from 75°C to 98°C.
The frequency of carbon filter replacement depends on usage and water quality, but typically it is recommended every 6-12 months. Refer to the product manual for specific guidance.
Yes, this tap is designed to fit standard kitchen sink configurations. Ensure you have adequate space for the under-sink boiler.
This model is an instant hot water tap and does not inherently dispense cold water. It is typically installed alongside your existing cold water tap or can be a standalone hot water dispenser.
The tap has a sleek brushed steel finish.
While not strictly mandatory, professional installation by a qualified plumber is highly recommended due to the electrical and plumbing connections involved.
Check that the boiler is powered on, the water supply is connected, and the temperature is set correctly. Ensure the carbon filter is not blocked.
Verify that the water supply valves are fully open. Check the carbon filter for clogging and replace if necessary. Inspect the tap spout for any blockages.
Ensure all plumbing connections are secure and tightened correctly. Check seals and O-rings for damage and replace if needed. If the leak persists, contact a professional plumber.
Try resetting the unit by turning off the power supply to the boiler for a few minutes and then turning it back on. If the issue continues, contact customer support.
Setup: Installation involves connecting the tap to your existing cold water supply and a power outlet for the boiler. The boiler unit should be mounted under the sink. Due to the electrical and plumbing requirements, professional installation by a qualified plumber is highly recommended to ensure safety and optimal performance. Ensure adequate space is available under your sink for the 2.4L boiler tank.
Compatibility: This tap is designed to fit standard kitchen sink configurations. Ensure you have a power outlet accessible near the installation site for the boiler.
Care: Clean the exterior of the tap with a soft, damp cloth and mild soap. Avoid abrasive cleaners that could damage the brushed steel finish. The carbon filter needs periodic replacement; consult the product manual for recommended replacement intervals and procedures. Descaling the boiler may be necessary depending on your water hardness.
