Q-Connect Chalk Markers - Medium Tip - White - Pack of 4

These markers are ideal for primed non-porous surfaces such as chalkboards, glass, whiteboards, tiles, plastic, and metal.

First, shake the marker well for about 15-20 seconds. Then, press the tip down firmly on a scrap surface several times until the ink saturates the tip and flows evenly.

Yes, but they work best on *primed* chalkboards. Using them on unprimed or porous chalkboards may result in difficulty erasing.

For best results, erase markings from non-porous surfaces using a damp cloth. Stubborn marks may require a suitable glass cleaner.

The dual tip allows for a line width between 1.5mm and 3.0mm, depending on whether you use the bullet or chisel edge and the angle of application.

Store the markers horizontally with the cap on tightly to prevent the ink from drying out.

No, the ink is designed to be erasable on appropriate non-porous surfaces when used correctly. They are not permanent markers.

Shake the marker thoroughly for at least 15-20 seconds. Prime the tip by pressing it down on a scrap surface until ink flows consistently. Ensure the cap was securely on when not in use.

Ensure you are using the marker on a *primed* non-porous surface. For difficult marks, try using a damp cloth with a mild cleaning solution suitable for the surface.

The ink may have dried out in the tip. Recap the marker tightly and try re-priming the tip by pressing it firmly on a scrap surface as described in the setup instructions.

Ensure the marker is shaken well and the ink is flowing evenly. Experiment with different pressures and angles on the bullet and chisel sides of the dual tip to achieve desired line widths.