Best current price£52.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£52.00Visit shop B&Q - Moisture Resistant Mdf Board25mm610mm X 305mm (2Ft X 1Ft)Pack Of 2
Visit shop1 offer from £52.00
View price history by clicking the chart icon.
This guide is for builders, renovators, and DIY enthusiasts working on interior projects in environments with occasional humidity. The key benefit is its resistance to moisture and swelling, ensuring durability in kitchens and bathrooms. A caveat is that it is strictly for interior use only. The Arranwood Moisture Resistant MDF board, 25mm thick and sold in a pack of two, offers a stable, smooth surface for finishing and is engineered for enhanced performance in damp conditions.
| Model Part Number | 25 mm – 610 × 305 mm – Pack of 2 |
|---|---|
| Brand | Arranwood |
No, this board is moisture resistant for occasional humidity like kitchens and bathrooms but is not designed for direct, prolonged water contact found in shower cubicles. For such applications, specific waterproof materials are required.
Each board covers approximately 2.97m². The pack contains two boards, providing a total coverage of approximately 5.94m².
No, the Arranwood Moisture Resistant MDF board is strictly for interior use only.
Store boards flat in a dry, indoor environment, away from direct sunlight and extreme temperature fluctuations. Avoid storing them where they can become damp.
E1 certification means the board meets European standards for low formaldehyde emissions, contributing to better indoor air quality.
Yes, the dense fibreboard structure provides a smooth surface that is suitable for laminating.
A 25mm thick MDF board of this size typically weighs around 20-25 kg per square meter. For a 610 x 305 mm board, this would be approximately 4.7 kg per board. Please refer to specific product documentation for exact weights if critical.
This can occur with prolonged direct water contact. Ensure all cut edges are properly sealed with a moisture-resistant primer or sealant, and wipe up any spills immediately.
Ensure the surface is clean and free from dust. Apply a suitable MDF primer before painting. Two coats of primer may be necessary for a perfectly smooth finish.
Use sharp, high-quality router bits or saw blades designed for MDF. Ensure the board is securely supported during cutting to prevent chipping.
Setup: Ensure boards are acclimatized to the installation environment for at least 48 hours before cutting or fixing. Use appropriate woodworking tools for cutting and shaping. For best results, pre-drill holes for fixings.
Compatibility: This MDF is compatible with standard woodworking adhesives, screws, and fasteners. It can be painted, veneered, or laminated using common finishing techniques. Ensure any edge treatment is also moisture-resistant.
Care: Clean surfaces with a slightly damp cloth and mild detergent if necessary. Avoid excessive moisture or prolonged exposure to standing water. Wipe spills immediately. For painted surfaces, use a durable, moisture-resistant paint. Ensure adequate ventilation in the installed environment to minimize condensation buildup.
