Hypo Jet 2.0 Chemical Injector Softwash Applicator - Equip2clean - Hypo Jet 2.0

The Hypo Jet 2.0 Chemical Injector is designed for professional softwash applications, providing a...

Best current price£189.95from DIY Refurb UK

One Offer

1 offer from £189.95

View price history by clicking the chart icon.

DIY Refurb UKEquip2clean Light Hypo Jet® 2.0 Chemical Injector Softwash Applicator
Free delivery in 1–3 days
£189.95
Visit shop

Product Information

Full details

The Hypo Jet 2.0 is designed for professional softwash contractors and serious homeowners looking to clean driveways, roofs, and building exteriors efficiently. Its primary benefit is the ability to apply harsh chemicals like sodium hypochlorite without exposing your pressure washer pump to corrosive damage, though users must note that precise chemical mixing ratios depend heavily on individual water flow rates and pressure settings.

All features

Model Part NumberHypo Jet 2.0
BrandEquip2clean

Extended Product Information

FAQs

Does this unit work with all pressure washers?

It is compatible with most standard pressure washer guns that feature 1/4 inch quick-release couplings, but its effectiveness depends on your machine's water flow (GPM).

Can I use strong acids with this injector?

The Hypo Jet 2.0 is designed primarily for sodium hypochlorite; check with chemical manufacturers regarding the suitability of the injector's seals before using harsh acids.

How do I determine the dilution ratio?

The dilution ratio is determined by the specific nozzle selected and the water flow rate of your pressure washer. Test your draw rate into a measuring jug to calibrate correctly.

What should I do if the nozzle clogs?

Unscrew the nozzle and rinse it thoroughly with clean water; use a soft pin if debris is lodged in the orifice.

Is the injector safe for my pressure washer pump?

Yes, it is designed to inject chemicals downstream of the pump, meaning the chemicals never pass through the pump mechanism.

How long is the suction hose?

The included suction hose is 6 meters long, providing plenty of length to reach chemical drums placed on the ground.

Troubleshooting

Chemical is not drawing from the container

Check that the suction hose is fully submerged, ensure the hose is not kinked, and verify that the quick-release connections are seated properly.

Inconsistent chemical flow

Check the weighted filter for debris buildup and ensure the ball valve is fully open.

Low spray distance

Ensure the pressure washer is running at its full rated flow and verify that the correct nozzle is selected for the desired range.

Pros and Cons

Pros

  • Protects pressure washer pump longevity
  • High-reach capability eliminates the need for ladders
  • Wide range of 10 nozzles for exact dilution control
  • Durable construction with chemically resistant components
  • Easy connection to existing equipment via quick-release

Cons

  • Requires calibration to understand dilution ratios for specific setups
  • Performance is dependent on the flow rate of the host pressure washer
  • Additional maintenance required to flush chemicals after use

Setup, Compatibility & Care

To set up the Hypo Jet 2.0, attach the device to your pressure washer gun using the quick-release coupling. Secure the 6-meter suction hose to the injector and drop the weighted filter into your chemical reservoir. Ensure the hose remains submerged to prevent air pockets. Compatibility is broad, as the 1/4-inch fittings work with almost all standard commercial and consumer pressure washers. For care, always flush the injector with fresh water after every use by running the system in a bucket of clean water for 30 seconds. This prevents crystallization of sodium hypochlorite inside the nozzle and valve, which can cause blockages over time.

Similar items

Price History

DatePrice
Visit shop