Best current price£53.41from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£53.41Visit shop Sealey Sa22 Air Operated Flat Bed Sander 5024209150828
Visit shop
B&Q£62.30Visit shop B&Q - Sa22 Air Flat Bed Sander
Visit shop12 offers from £53.41 - £73.98
View price history by clicking the chart icon.
The Sealey SA22 Air Operated Flat Bed Sander is designed for professionals and serious DIYers needing smooth, efficient flat surface sanding, particularly in automotive and workshop settings. Its key benefit is reduced user fatigue due to a counter-balanced drive shaft, ensuring stable operation. A caveat is the requirement for an air compressor, limiting its use in environments without one. This tool excels at providing a consistent finish through its orbital action and palm-type trigger for control.
| Model Part Number | SA22 |
|---|---|
| Brand | Sealey |
Use standard hook-and-loop sanding discs designed for orbital sanders. The grit selection depends on the task, from coarse grits for material removal to fine grits for finishing.
Typically, this type of air-operated sander requires around 90 PSI. Always consult the product manual for specific recommended operating pressure.
Yes, the Sealey SA22 is suitable for sanding wood, especially for achieving flat surfaces and preparing wood for finishing.
The counter-balanced drive shaft significantly reduces vibrations transmitted to the user, allowing for more comfortable and controlled operation during extended sanding sessions.
The sander has a standard 1/4" BSP air inlet. You will need a compatible air hose with a matching fitting, often a quick-release coupler for ease of use.
Yes, it is recommended to add a few drops of air tool oil to the air inlet before use and periodically during operation to maintain smooth performance and prolong the tool's life.
Check air hose connection for leaks. Ensure the air compressor is providing sufficient pressure and airflow. Verify the palm trigger is fully engaged. Lubricate the air inlet if operation seems sluggish.
Ensure the sanding pad is clean and free from debris. Check that the sandpaper is correctly attached and not overloaded. Verify the counter-balanced drive shaft is not obstructed or damaged.
Confirm the correct grit sandpaper is being used for the task. Ensure sandpaper is securely attached and not worn out. Check that the sander is moving at a consistent speed across the surface.
Inspect all external fittings and connections for tightness. If leaks persist, the tool may require internal servicing or seal replacement.
Setup: Connect the sander to a suitable air compressor using a standard air hose and quick-release coupler. Ensure the air pressure is set within the manufacturer's recommended range (typically 90 PSI for this type of tool). Lubricate the air inlet with a few drops of air tool oil before first use and periodically during operation.
Compatibility: Requires an air compressor capable of delivering adequate airflow (CFM - Cubic Feet per Minute) and pressure (PSI - Pounds per Square Inch) for continuous operation. The SA22 uses standard 1/4" BSP air inlet fittings.
Care: After each use, disconnect from the air supply and clean the sanding pad and housing with a dry or slightly damp cloth. Store in a dry place. Regularly check the air filter on the compressor to ensure clean air supply. Periodically lubricate the tool's air mechanism as per general air tool maintenance guidelines.
