TIMco Round Wire Nails Galvanised - 125 x 5.60mm - 2.5 KG

Service Class 2 indicates that the nails are suitable for use in environments that are protected from the weather but may experience occasional dampness, such as internal spaces with high humidity or sheltered external areas. They are not designed for direct or prolonged exposure to rain or other elements.

For outdoor furniture that will be exposed to the elements, these nails are generally not recommended due to their Service Class 2 rating. Consider using stainless steel nails for better corrosion resistance in such applications.

The product description states there are approximately 42 pieces per 1kg. Therefore, a 2.5kg pack would contain approximately 105 nails (42 pcs/kg * 2.5 kg).

Yes, these nails conform to Eurocode 5 and BS EN 14592:2008, making them suitable for structural framing applications within their specified service class limitations.

The round head provides a larger surface area for hammering, making it easier to strike accurately. It also offers good clamping force when driving the nail, helping to hold materials together securely.

Store the nails in a cool, dry place away from moisture. The galvanised coating provides protection, but prolonged exposure to damp conditions will eventually lead to rust.

Ensure the hammer strike is square and direct. For very dense wood, pre-drilling a pilot hole might be necessary, or consider a nail with a larger shank diameter.

Inspect the nails before use. If the coating is significantly compromised, the nail's corrosion resistance will be reduced. Use a different nail for applications requiring higher corrosion protection.

Check if the wood is splitting, which can reduce holding power. Ensure the nail is driven straight and deep enough into the material. For very soft woods, a slightly wider nail or specific fastening technique might be needed.