Best current price£15.35from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.35Visit shop B&Q - Glue Precision Liquid 5G (3 Pack)Clear Strong Adhesive With Long Nozzle For Accurate Diy Repairs
Visit shop3 offers from £15.35
View price history by clicking the chart icon.
The Loctite Precision Liquid Glue (3 Pack) is designed for users who need accurate, fast, and strong bonds for detailed repairs and regular DIY projects. Its key benefit is the ultra-thin, long precision nozzle that allows for exact application in tight spaces, ensuring clean, invisible repairs. A potential caveat is that it is not suitable for polyethylene or polypropylene plastics.
| Colour | White |
|---|---|
| Brand | Loctite |
For the strongest bond, ensure the surfaces are clean, dry, and free of dust, oil, or grease. Apply a thin, even layer of glue to one surface, press the parts together firmly, and hold for at least 30 seconds. Allow 24 hours for full curing.
This glue is not suitable for polyethylene (PE) or polypropylene (PP) plastics. It is also not recommended for Styrofoam (polystyrene) or fabrics that will be dry-cleaned.
With the anti-clog cap properly sealed after each use and stored in a cool, dry place, the glue can remain effective for many months. However, performance may gradually decrease over time.
It is not recommended for use on surfaces that come into direct contact with food due to potential leaching and non-food-safe properties.
The adhesive is resistant to water once fully cured, making it suitable for items that may come into contact with moisture.
Cured Loctite Precision Liquid Glue can be difficult to remove. For stubborn residue, you can try carefully scraping it away or using acetone (nail polish remover), but always test on an inconspicuous area first to ensure it doesn't damage the material.
This 'Precision Liquid Glue' is specifically formulated with an ultra-thin nozzle for exact application on small or hard-to-reach areas, focusing on speed and clarity for detailed work. Other Loctite glues may offer different viscosities, setting times, or flexibility depending on their intended purpose.
Ensure the cap is fully removed. The nozzle might be clogged; try to clear it with a pin or paperclip. If the glue has hardened in the nozzle, a new bottle may be needed.
Ensure surfaces were clean, dry, and free from contaminants. Press parts together firmly for at least 30 seconds. Verify that the materials are compatible with cyanoacrylate glue.
Do not force skin apart. Soak the bonded area in warm, soapy water. Gently peel or roll the skin apart using a blunt edge, like a spoon. Acetone (nail polish remover) can help dissolve the adhesive on skin, but use with caution and rinse thoroughly afterward.
This can sometimes occur with cyanoacrylate glues, especially when used in large amounts or in humid conditions ('blooming'). Ensure good ventilation and use only the amount needed. For best clarity, apply thinly.
Setup: No specific setup is required. Ensure the surfaces to be bonded are clean, dry, and free from grease or dust for optimal adhesion.
Compatibility: Suitable for bonding metal, wood, rubber, leather, ceramic, paper, and most plastics. Not suitable for polyethylene (PE) or polypropylene (PP) plastics. Always test on an inconspicuous area first if unsure.
Care: Store bottles upright in a cool, dry place away from direct sunlight. Keep the cap securely on the nozzle when not in use to prevent clogging. Clean up any excess uncured adhesive immediately with a dry cloth. Cured adhesive can be carefully scraped or removed with acetone (test compatibility first).
