Best current price£47.45from eBay
Shopping.co.uk recommended and popular offers
eBay£47.45Visit shop Ace W4 British Inox 12mm H/Clips 140 - ACE4524
Visit shop
B&Q£56.37Visit shop B&Q - W4 British Inox 12mm H Clips 140 Stainless Steel 18/8 Pack Of 10
Visit shop2 offers from £47.45 - £56.37
View price history by clicking the chart icon.
The Van Line W4 British Hose Clips are ideal for professionals and hobbyists in automotive, agricultural, or engineering sectors who require a robust, corrosion-resistant solution for securing hoses. These 12mm wide, 110-140mm capacity clips offer a reliable seal and long-term durability in demanding environments, though they require correct sizing to ensure the band does not bottom out during installation.
| Model Part Number | ACE4524 |
|---|---|
| Brand | Van Line |
While the 304/A2 stainless steel is generally considered non-magnetic, cold working during manufacturing can sometimes induce slight magnetism.
These are designed for general purpose hose fastening; always check if your fuel system requires specific high-pressure constant-tension clamps.
A standard flathead screwdriver or a 7mm hex nut driver is typically sufficient.
Yes, provided the screw threads and the band shape have not been distorted during the previous installation.
No, this specific pack (ACE4524) contains 10 clips that are all sized for the 110-140mm range.
Ensure the screw threads are free of debris; apply a small amount of lubricant if necessary.
Verify the hose diameter is within the 110-140mm range; if the hose is too small, the clip cannot achieve proper tension.
Ensure the clip is positioned flat and that the screw has not been overtightened beyond the necessary torque to seal the joint.
To install, slide the hose onto your connection point and slip the clip over the hose end. Tighten the screw clockwise using a flathead or hexagonal socket driver. Ensure the band is positioned correctly over the hose barb. To maintain the life of the clip, avoid overtightening, as this can strip the screw threads or damage the hose material. If used in extreme marine or chemical environments, periodic rinsing with fresh water can help prolong the finish of the stainless steel. Always verify that your application diameter falls within the 110-140mm range; if the clip is too loose, the band may overlap too far, causing uneven pressure.
