VEVOR Pneumatic Staple Gun - PW2638-L
Best current price£78.81from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£78.81Visit shop VEVOR Pneumatic Staple Gun 16 Gauge 26.4mm Wide Crown Air Stapler 70-120 PSI
Visit shopeBay£78.81Visit shop All Offers
2 offers from £78.81 - £122.90
View price history by clicking the chart icon.
eBayVEVOR Pneumatic Staple Gun 16 Gauge 26.4mm Wide Crown Air Stapler 70-120 PSI
Free delivery in 1–3 days
£78.81
Visit shop
Vevor UKVEVOR Pneumatic Staple Gun, 16 Gauge 26.4mm Wide Crown Pneumatic Stapler 16mm to 38mm Length, 70-120PSI Air Staple Gun with Two Firing Modes for Roof Decking, Wall Sheathing, Fencing, Subflooring
Free delivery in 1–3 days
£122.90
Visit shop
Product Information
Full details
The VEVOR 16-gauge pneumatic staple gun (PW2638-L) is a heavy-duty fastening tool designed for professional contractors and serious DIYers involved in framing, roofing, and subflooring projects. Its primary benefit is the high-capacity magazine and dual firing modes, which significantly increase efficiency during repetitive fastening tasks; however, users should be aware that it requires an external air compressor to operate, which is not included in the package.
All features
| Model Part Number | PW2638-L |
|---|---|
| Brand | VEVOR |
Extended Product Information
FAQs
What size staples does the VEVOR PW2638-L use?
It uses 16-gauge wide crown staples with a crown width of 1 inch (26.4 mm) and lengths between 5/8 and 1-1/2 inches.
Does the stapler come with an air compressor?
No, the air compressor is not included and must be purchased separately.
What is the operating pressure range?
The tool operates optimally at a pressure between 70 and 120 PSI.
Can I use this for upholstery?
This tool is designed for heavy-duty framing and sheathing. It is likely too powerful and bulky for delicate upholstery work.
What type of air fitting do I need?
The tool utilizes a standard 1/4 inch NPT air inlet.
How do I switch between firing modes?
Consult the included manual for your specific model's selector switch location, usually found near the trigger assembly.
Troubleshooting
Staple does not drive flush with the surface
Adjust the air compressor regulator to increase pressure (ensure it stays under 120 PSI) or check if the fastener length is appropriate for the material thickness.
Tool is jammed
Disconnect the air supply immediately, open the quick-release nose mechanism, remove the bent or jammed staple, and ensure the magazine channel is clear of debris.
Air leakage from the tool
Check all fitting connections at the air inlet. If the leak persists, inspect the internal O-rings for wear and tear, and replace if necessary.
Pros and Cons
Pros
- Versatile firing modes for different skill levels and project requirements
- Large 140-staple capacity reduces reload frequency
- Durable aluminum construction built to withstand job site conditions
- Easy jam clearing via quick-release nose design
Cons
- Air compressor required for operation (sold separately)
- Not intended for fine finish work due to 16-gauge staple size
- Requires a consistent 70-120 PSI air supply
Setup, Compatibility & Care
To set up the tool, ensure your air compressor is turned off and disconnected. Connect your air hose to the 1/4 inch NPT air inlet on the tool, ensuring the connection is airtight. Slide the staple strip into the magazine until it locks into place.
Compatibility: This tool accepts 16-gauge staples with a 1-inch crown and lengths between 5/8 and 1-1/2 inches.
Care Instructions: Regularly lubricate the tool with a few drops of pneumatic tool oil via the air inlet before each use. Check the magazine for debris buildup weekly. If the tool sits unused for long periods, store it in a dry, dust-free environment to prevent corrosion of the internal piston components.