Metsä Wood Rough Sawn Whitewood Spruce Stick Timber - L2.4M W200mm T25mm

Use a saw with a blade suitable for softwood. Ensure the timber is securely held during cutting to prevent movement and ensure accurate cuts. A handsaw or circular saw works well.

Yes, you can paint this timber. However, it's recommended to sand the surface lightly to ensure the paint adheres well. Use a primer before applying the paint for best results.

Apply a suitable wood treatment or sealant to protect the timber from moisture and weathering. This will extend the timber's lifespan and prevent rot.

Yes, it is suitable for outdoor use. However, it is essential to treat it with a wood preservative to protect it from the elements and prevent decay.

Yes, this timber can be used for structural projects. Always check the load-bearing capabilities and ensure proper sizing for the specific application. Follow all relevant building codes.

Pre-drill holes when fastening with screws or nails, especially near the ends of the timber, to prevent splitting. Use appropriate fasteners and avoid over-tightening them.

This timber is available at various building supply stores. Check with your local retailers for availability.

Ensure the timber is stored in a flat, dry place. Apply weights to straighten it if needed. Consider using kiln-dried timber to minimize warping.

Wear gloves when handling the timber. Use sharp tools and avoid excessive force during cutting and fastening.

Use a sharp saw blade suitable for softwood. Ensure the timber is securely held in place while cutting.