Power-Tec Weld On Plate - 75mm - 5 Pack
Best current price£41.82from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£41.82Visit shop Power-TEC 5 x 75mm weld on plate aluminium 91102
Visit shopeBay£41.82Visit shop All Offers
5 offers from £41.82 - £44.01
View price history by clicking the chart icon.
Power-TEC 5 x 75mm weld on plate aluminium 91102Free delivery in 1–3 days£41.82Visit shop →
Power-Tec 91102 5 x 75mm Weld On Plate AluminiumFree delivery in 1–3 days£42.43Visit shop →
Power-TEC 5 x 75mm weld on plate aluminium 91102Free delivery in 1–3 days£43.24Visit shop →
Power-Tec 91102 5 x 75mm Weld On Plate AluminiumFree delivery in 1–3 days£44.01Visit shop →
Product Information
Full details
The Power-Tec Weld On Plate (75mm) is an essential tool for automotive bodywork technicians who require a reliable anchor point for difficult pulling applications. Designed specifically for integration with the Tack 'n' Pull system and similar pulling equipment, these plates provide high-strength stability when repairing vehicle panels; however, users must be proficient in welding techniques and prepared for the necessary paint refinishing required after removal.
All features
| Model Part Number | 91102 |
|---|---|
| Brand | Power-Tec |
Extended Product Information
FAQs
Are these plates reusable?
No, these are single-use plates intended to be welded and then ground off during the repair process.
Can I use these with other pulling systems?
While designed for the Tack 'n' Pull system, they are compatible with many standard pull clamps that can accommodate a 75mm plate width.
Do I need special welding equipment?
Standard MIG or spot welding equipment capable of automotive panel repair is required.
What should I do after removing the plate?
You must grind down the residual weld spots, treat the area for corrosion, and perform body filler or finishing work as required for the repair.
Are smaller sizes available?
Yes, Power-Tec offers 25mm (Part No. 91100) and 38mm (Part No. 91101) plates for smaller or more localized repairs.
Troubleshooting
Plate detaches during pulling
Ensure the weld penetration is sufficient for the amount of tension applied and verify that the area was cleaned to bare metal before welding.
Clamp will not slide onto the plate
Check for excessive weld splatter on the edges of the plate and clear away debris before attempting to attach the clamp.
Pros and Cons
Pros
- Provides a superior grip compared to standard clamps
- Essential for complex bodyline and deep dent repairs
- Compatible with a wide range of pulling systems
- Durable construction ensures reliable performance under tension
Cons
- Requires professional welding equipment and skills
- Must be ground off after repair completion
- Involves post-repair refinishing of the vehicle panel
- Not suitable for use on materials that cannot be welded
Setup, Compatibility & Care
To use the plates, ensure the vehicle surface is stripped of paint to bare metal at the weld site. Position the plate and perform a secure tack weld. Slide the pull clamp onto the plate edges until fully engaged. After the repair is complete, use a grinder to remove the plate and dress the remaining metal. These are compatible with other sizes in the Power-Tec range, including the 25mm (Part No. 91100) and 38mm (Part No. 91101) versions. Store unused plates in a dry environment to prevent surface corrosion.