Best current price£7.69from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.69Visit shop B&Q - Eye Protection Must Be Worn Polyvinyl Chloride (Pvc) Advisory Sticker(H)200mm (W)150mm (L)200mm
Visit shop1 offer from £7.69
View price history by clicking the chart icon.
This guide is for professionals in laboratories, scientific, and medical environments who need to clearly communicate essential safety requirements. The "Eye Protection Must Be Worn" self-adhesive labels ensure compliance and safety in hazardous areas by providing a highly visible warning. A potential limitation is that effectiveness relies on proper placement and the user's adherence to safety protocols.
| Brand | The House Nameplate Company |
|---|
The labels measure 20cm by 15cm.
These labels are designed for indoor environments like laboratories and medical facilities. Prolonged outdoor exposure may degrade the material and adhesive.
While the surface may accept some markers, it is not specifically designed for writing. For best results and legibility, rely on the pre-printed message. Writing may smudge or fade.
When applied correctly to a suitable surface, the adhesive is designed for long-term holding. Actual lifespan can vary based on environmental conditions.
The labels are resistant to light moisture, but they are not intended for submersion in water. Clean with a damp cloth rather than washing.
They adhere well to most smooth, clean, and dry surfaces such as glass, metal, plastic, and painted walls.
Ensure the surface is clean, dry, and smooth before application. Reapply pressure to the label. For difficult surfaces, consider using a compatible industrial adhesive promoter (sold separately).
Avoid prolonged exposure to direct sunlight or harsh chemicals. Clean only with a damp cloth as per care instructions. If significant fading occurs, replace the label.
Ensure the backing is fully peeled from the edges. If it tears, carefully lift an edge with a thin, blunt tool.
Setup: Clean the intended surface thoroughly to remove dust, grease, or moisture. Peel the backing off the self-adhesive label and carefully apply it to the cleaned surface, smoothing out any air bubbles from the center outwards. Press firmly to ensure a secure bond.
Compatibility: These labels are designed to adhere to most smooth, non-porous surfaces including painted walls, metal, glass, and clean plastic. Compatibility may be reduced on rough, uneven, or heavily textured surfaces.
Care: To maintain adhesion and legibility, clean the labels gently with a damp cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the label or adhesive.
