Best current price£10.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.49Visit shop B&Q - Sediment Water Filter Cartridge10" X 2.5"5 MicronSpun Polypropylene (3 Pack)
Visit shop2 offers from £10.49 - £12.95
View price history by clicking the chart icon.
This 3-pack of Finerfilters Sediment Water Filter Cartridges is designed for homeowners and businesses seeking clearer water by effectively removing particulate matter. The key benefit is improved water clarity and protection for downstream filtration systems. A potential consideration is that these are single-stage filters and may require additional stages for comprehensive water purification. The cartridges measure 10" x 2.5" and are made from spun polypropylene, offering a 5-micron filtration level to capture sand, dirt, and rust.
| Brand | Finerfilters |
|---|
Each cartridge measures 10 inches in length and 2.5 inches in diameter, fitting all standard 10" filter housings.
A 5-micron rating indicates the smallest particle size the filter is designed to effectively capture. It means the filter can remove particles down to 5 micrometers in size.
No, these are disposable sediment filter cartridges and are not designed to be cleaned and reused. They should be replaced when flow decreases or on a regular schedule.
Replacement frequency depends on your water quality and usage. A general guideline is every 3-6 months, or when you notice a significant drop in water pressure or flow.
Yes, when used in a suitable water filtration system, these filters help remove sediment, making water clearer and more aesthetically pleasing for drinking. However, they do not remove bacteria, viruses, or chemical contaminants.
Absolutely. Using these sediment filters as the first stage is highly recommended to protect the finer membranes of your RO system from sediment buildup.
The cartridges are constructed from spun polypropylene, a durable and effective material for capturing sediment particles.
Ensure the cartridge is properly seated in the housing and that the filter housing is not overtightened, which can restrict flow. Check for any kinks in the supply line.
Check that the O-ring is correctly positioned and free from debris. Ensure the housing is screwed on straight and tightened sufficiently. Replace the O-ring if it appears damaged or worn.
The sediment particles may be smaller than 5 microns, or there could be other contaminants present. Consider using a finer micron-rated filter (if compatible with your system) or adding additional filtration stages.
This typically indicates a very high sediment load in the water source. Consider installing a coarser pre-filter before this cartridge or increasing the frequency of replacement.
Setup:
Compatibility:
Care:
