Spares2Go Universal Pan Support & Burner Kit - Black

The kit is designed with a universal fit in mind, making it compatible with a wide range of gas hobs and cookers. However, it's always best to compare the provided dimensions (455mm x 245mm for grids) with your existing parts.

Basic installation typically does not require specialized tools, but it is essential to turn off the gas supply before starting. If you are uncomfortable with the process, professional installation is recommended.

Clean the pan supports with a damp cloth and a mild detergent. For stubborn grease, a non-abrasive kitchen cleaner can be used. Ensure they are completely dry before placing them back on the hob.

The pan support is the grid that sits on top of the hob, providing a stable surface for your cookware. The burner is the component beneath the pan support that produces the flame.

You can replace individual burners as needed. This kit includes four burners, so you have spares if multiple require replacement or if you wish to have them on hand.

A yellow flame usually indicates incomplete combustion, often due to a blockage in the burner holes or air intake. Ensure the burner cap and base are clean and properly aligned. If the issue persists, consult your appliance manual or a qualified technician.

Check for any debris on the hob surface or the underside of the support. Ensure you have the correct orientation; some supports are specific to left/right sides.

Ensure the burner cap is seated correctly and is clean. Check that the gas jets are clear of debris. Verify the gas supply to the hob is adequate.

Double-check the dimensions against your original parts. Minor positional adjustments might be needed. For significant fitting issues, professional assistance may be required.